This is from SB98-13-L004. I believe this applies to all 98-2001 Troopers and Rodeos. This is verbatim from the TSB:
INITIAL REMOTE PROGRAMMING
This procecdure erases all exsisting transmitters codes and programs only one remote to the system. To program additional remotes, see Adding Additional Remotes. Perform these steps as quickly as possible.
Step: Operation: Confirmation
1: Close all doors
2: Open the driver's door
3: Insert key in the ignition
4: Turn key to ACCESSORY then OFF 3-times, in one-second intervals
5: Close and open the driver's door 2-times, in one second intervals. door pin switch may be toggled instead.)
6: Turn the key to ACCESSORY then OFF 5-times, in one-second intervals.
7: Close, then open the driver's door. (Door pin switch may be toggled instead.)
8: Press the lock button of the remote being programmed.
9: Press the lock button of the remote. RESPONSE: The doors will lock and unlock 1-time.
ADDING ADDITIONAL REMOTES
This procecdure is perfromed after initial remote programming. Perfrom this procedure for each remote. Perfrom these steps as quickly as possible.
Step: Operation: Confirmation
1: Close all doors
2: Open the driver's door
3: Insert key in the ignition
4: Turn key to ACCESSORY then OFF 3-times, in one-second intervals
5: Close and open the driver's door 2-times, in one second intervals. (door pin switch may be toggled instead.)
6: Turn the key to ACCESSORY then OFF 3-times, in one-second intervals.
7: Close, then open the driver's door 1-time. (Door pin switch may be toggled instead.)
8: Press the lock button of the remote being programmed.
9: Press the lock button of the remote. RESPONSE: The doors will lock and unlock 1-time.
CHECKING NUMBER OF PROGRAMMED TRANSMITTERS
This procedure indentifies how many remotes are programmed to the security system. Perform these steps are quickly as possible.
Step: Operation: Confirmation
1: Close all doors
2: Open the driver's door
3: Insert key in the ignition
4: Turn key to ACCESSORY then OFF 3-times, in one-second intervals
5: Close and open the driver's door 2-times, in one second intervals. (Door pin switch may be toggled instead.)
6: Turn the key to ACCESSORY then OFF
7: Close andopen the driver's door. RESPONSE: The doors will lock and unlock 1-time for each remote programmed.
TURNING CHIRP CONFIRMATION ON/OFF
This procedure is for turning the Arm/Disarm confirmation chirp ON or OFF. All steps must be followed carfully. It may take several attempts to sucessfully perform this procedure. Perform these steps as quickly as possible.
Step: Operation: Confirmation
1: Close all doors
2: Open the driver's door
3: Insert key in the driver's door lock.
4: Turn key to lock-center-unlock (Left-center-right) 3-times, in one-second intervals
5: Close and open the driver's door 2-times, in one second intervals. (Door pin switch may be toggled instead.)
6: Turn key to lock-center-unlock (Left-center-right) 3-times, in one-second intervals
7: Close and open the driver's door. RESPONSE: The doors will lock and unlock 1-time.
I need instructions on how to program a keyless remote for a 1999 Cadillac Deville.
how do you program keyless entry remote 98 GMC
With the dealers scan tool.
go to the site programyourremote.com
Go to best buy and ask the geek squad!
No, it has to be the right one. Take it to a dealer or a locksmith that does remotes.
you must take it to the dealership. there they can look up the frequency code that goes with your specifically.
With the dealers scan tool.With the dealers scan tool.
Dealer, eBay, etc.
nopo
The battery in the keyless remote of a 1999 Mercedes E320 is changed by prying off the back cover and lifting the battery out. The battery will typically last 2 years or more under normal use.
centre top dashboard (red dome)