answersLogoWhite
Mitsubishi Galant
Mitsubishi Montero, Pajero, and Shogun

How do you program a key chip for a Mitsubishi outlander?


Top Answer
User Avatar
Wiki User
Answered 2010-06-16 03:48:11

If you have a key that is already programmed to your Outlander, use that key first. Place it in the ignition and turn to the "on" position five times. A light should come on your dash (looks like a car with a key inside). Once that light comes on, turn to the off position, remove your first key the place the "new" or unregistered key in the ignition and turn to the "On" position (not start). This should program your key to your Outlander.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0
User Avatar

Your Answer

Related Questions


how to program a new key 2008 mitsubishi colt


If it has a cover on the key, yes. If it is a steel key no.


You can program a blank key for Mitsubishi Endeavor 2006 using Transponder Key Blank Fits.


Leave windows open & then unlock manually from internal section


The dealer scan tool is required to program a key on this Mitsubishi built car.


Go to your Chrysler dealer and ask them to program it.


only a dealership will be able to do this the key has a ohm rating in the chip that the car key solenoids corresponds with you would have to take it to the dealer if its a new key so they can program the chip in the key


you can program a key if you already have two known good keys. if not you will have to pay the dealer or a locksmith




Most locksmiths can cut and program a key to this car. The price for the key at Keylessride.com is $29.99. Sometimes they can refer a locksmith to you in your area. Yes there is a chip in the key.


It's not anything you can do yourself. Any Toyota dealer or well equipped locksmith shop can "flash" the chip in the key.


i THINK IT MEANS THE CHIP IN YOUR KEY HAS BEEN DE-ACTIVATED. I'M TRYING TO RESEARCH HOW TO RE-ACTIVATE IT...


yes but if the key has a chip in it then you will have to go to a dealership for tehm to program you a new one.


get the black wire and then the red wire and then pull the chip out of it and take the key and unlocked the dricer door


Yes, the owners manual details how to program your ignition to a new key.


No it does not have a chip in the key. www.keylessride.com


You can't. Only a Toyota dealer can program the transponder key as it has a chip inside the key and has to communicate with the engine in order to start the car. Toyota dealer charges 1/2 hour of labor about $42 to program. Now the remote is easy...but not the key.



It could. A gray key does have a chip, a black key does not.


In order to program a VW Gold 2002 keyless entry, you would need the metal key flip, keyless entry remote and the immobilizer chip. Once you program the three components, you would have to program the immobilizer chip separately.?æ


You can buy it at the dealer about $100 i think... Or buy a blank Mitsubishi endeavor key (Transponder) about $20.00 from the internet and have it cut (copy the original) at ace hardware and program the key yourself. Instruction to program is somewhere else here at answers.com Be sure you have two original transponder keys before you buy so you can program it to your car. If only one...you have no choice bu go to the dealer.


Its a programmable chip inside of the key .


The chip key system can not be bypassed. The engine computer will not allow the vehicle to start with out a good key message from the chip key computer.


A Mitsubishi GLI 2001 Lancer replacement key can be purchased from a Mitsubishi dealership. A local locksmith can also replace the key for a fee.



Copyright ยฉ 2021 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.