answersLogoWhite

0


Best Answer

This works for the 1993 Grand Cherokee: Sit inside the vehicle with all the doors closed. Place ignition in the OFF position. Open the driver's door. Leave Open. Move the mechanical door lever to the LOCK position. Turn the ignition to the RUN position. Aim the transmitter at the Keyless Entry receiver and press Lock button. Hold for five seconds until the door locks cycle. Turn ignition OFF within 20 seconds.

User Avatar

Wiki User

18y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you program a keyless transmitter for a 1993 Jeep Grand Cherokee Laredo?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you program the keyless remote entry for a 2000 Jeep Grand Cherokee Laredo?

dealer has to do it with factory scan tool


How do i find out what keyless entry module is in a 1998 jeep grand Cherokee Laredo 6cyl 4.0l engine?

this is located in passenger door switch


Is a 1994 Laredo door harness compatiable with a 1994 Jeep Grand Cherokee?

Cherokee Laredo, no. Grand Cherokee Laredo, yes.


How do change cooling fan on a 2002 cherolee Laredo?

There is no such thing as a 2002 Cherokee Laredo. The last year for the Cherokee was 2001, and the last year it came with the Laredo trim was 1992. I have a 2003 Cherokee Laredo so this awnser makes no sense at all. Do you have a GRAND Cherokee Laredo? Those are still being made. They are not the same as the Cherokee.


Is a Jeep Cherokee and Jeep Cherokee Laredo similar?

Yes, Laredo is just a trim package.


What are the biggest tire you can put on a stock 1995 jeep Cherokee Laredo?

Jeep did not make a Cherokee Laredo, they did make a grand Cherokee Laredo, and you can fit 31 inch tires.


Is the Jeep Laredo a Grand Cherokee?

yes There was also a Laredo package for the XJ Cherokee in the 1990's.


Where is the blower motor in your 96 jeep grand Cherokee Laredo?

I mean how do you disassemble the fan blower in a 1998 Jeep Grand Cherokee Laredo. how do you remove the blower fan from the car in the Grand Jeep Cherokee Laredo.


Will a bcm from 2000 Jeep Grand Cherokee Laredo work on a 2003 Jeep Grand Cherokee Laredo with the same equipment?

No.


Will a 1999 Jeep Grand Cherokee Laredo with a 4.0 transmission fit a 1999 Jeep Grand Cherokee Laredo with a 4.7?

No, they will not interchange.


What is the firing order for a 1995 Jeep Grand Cherokee Laredo diagram?

What is the firing order for a 1995 Jeep Grand Cherokee Laredo?


How do you program a keyless entry for a 94 Jeep Grand Cherokee Laredo?

My 1994 manual says on page 10: 1. Sit inside of vehicle and close all doors. 2. Place ignition in off position. 3. Open drivers door and leave open during programming procedure. 4. Move the mechanical door lock lever to the LOCK position. 5. Turn ignition to the run position. 6. Aim the transmitter at the Keyless Entry receiver in the overhead console or in the dome light assembly and press the Lock button. 7. Hold the button until the light on the transmitter blinks twice. 8. Turn ignition off within 20 seconds. 9. Check receiver memory by cycling the door locks using the transmitter 10. Up to 4 transmitter can be programmed into a vehicle. I typed this exactly as the manual says it. Hope this helps. OneshotCody vls@juno.com