1. Move the driver's seat forward, and locate the security system control unit mounted on the underneath the seat.
2. Turn on ignition switch on.
3. Press and hold the green programming button on the control unit with a pen. you will have to poke through a hole about the size of a pencil located on the side of the unit. when the security system LED on the instrument panel comes on, release the program button, (Step 3 and 4 must be done within 5 seconds of each other.)
4. Press and release the top button on the transmitter, check that the LED goes out chirps once, and the front marker lights flash to confirm that the transmitter's code worked by the control unit.
5. if you have other transmitters to program, repeat steps 3 and 4.
6. Turn the ignition switch off to exit the programming mode.
Where is my filter for my 97 ISUZU RODEO
How to remove the starter from a 1997 Isuzu Rodeo 4X4 automatic
How do I remove the front shock bottle pin of my Isuzu rodeo 2000
On a 1997 Isuzu Rodeo, the oil filter is located on the bottom front of the motor beneath the fan.
what type of transmission fluid used for a 97 Isuzu rodeo
In my 93 Isuzu Rodeo you have to add your transmission fluid buy poring it into the the transmission fluid dipstick.
on the right side of the engine
yes
Which lights?
take the cap off and roll another rodeo under it
As per www.totalrecallinfo.com there are no recalls on this model.
Mine is located on the steering wheel . press the lower portion of the wheel . i have the 1997 holden rodeo .