How do you program remote for 1997 Acura TL?

Answer 1

Acura Keyless Entry Programming Instructions 1998 2.5TL with factory-installed security system 1996-98 3.2TL with factory-installed security system

Preliminary Information: 1) This system accepts up to two transmitters. 2) Entering the programming mode cancels all learned transmitter codes, so none of the previously programmed transmitters will work. You must reprogram all the transmitters once you're in the programming mode. Programming the Transmitter(s): 1) Sit in the driver's seat and open the driver's door. 2) Push up the driver's door master power door lock to the unlock position. Hold it there for the rest of this procedure. 3) Insert the key in the ignition switch and then remove it. Repeat this four more times within 10 seconds. (Steps 3 and 4 must be completed within 10 seconds, or the system will exit the programming mode.) 4) Insert the key in the ignition switch. Make sure the power door locks cycle to indicate that the system has entered programming mode. 5) Press the "LOCK" or "UNLOCK" button on the transmitter. Make sure the power door locks (all except the driver's door) cycle to indicate that the transmitter has been accepted. 6) To program a second transmitter, press its "LOCK" or "UNLOCK" button within 10 seconds. 7) Release the master power door lock switch to exit the programming mode. 8) Remove the key from the ignition and confirm proper operation of all remotes.