answersLogoWhite

0


Best Answer

1. In the car, press and HOLD the outer two HomeLink buttons until the HomeLink light begins to flash rapidly. This will clear any old codes left in the car's controls.

2. Take the garage remote and hold it near the HomeLink buttons. Press and HOLD BOTH the garage remote and one of the HomeLink buttons until the HomeLink light begins to flash rapidly.

Now your car has learned the proper garage door code, but you must get "permission" from the garage door opener itself before it will let the Buick open the door:

3. Climb up on a ladder and press the "Learn" button on the back of the garage door opener. WITHIN 30 SECONDS, get back into the car and press the programmed HomeLink button 3 times, for about 2 seconds each time.

When the garage light flashes, your code is locked in!

(Different door opener power heads have different routine to "learn" the HomeLink remote. Consult your owner manual for the door opener power head to program it to learn mode.)

More specifics are available at homelink.com.

User Avatar

Wiki User

11y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How do you program the built in garage door opener Buick Riviera?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How do you program the remote garage door opener in a 1997 buick park ave?

Full instructions are listed in your owners manual


Diagram of fuse panel on 1994 buick park ave?

Tn On Garage Door Opener


How do you program a built-in opener on a 2007 Buick?

Open and read your owner's manual.


How do you program the sun visor remote control for a garage on a 2000 Buick LeSabre?

Hold down the two outside buttons until the indicator light begins to flash rapidly (after 20 seconds) Then release the buttons.Decide which buttion you want to program. Hold you hand held opener about 2 to 5 inches away from the car opener. Press the handle held opener button and the desired button on the car opener, and hold them until you see the car opener flash slowly and then rapidly. When it is flashing repidly you can release the buttons and your car opener will now open and close your garage.


How do you program the garage door remote in a 1995 Buick Riviera?

The procedure for doing this varies from manufacture to manfacture. If your owners manual does not provide the required instructions, I suggest you call GM, Buick division for help. The number is listed in your owners manual or you can find it at www.gm.com.


When was Buick Riviera created?

Buick Riviera was created in 1963.


Program Buick Park Avenue garage door opener?

Press and hold the two outside buttons until the light blinks. Then at the same time press the button on your remote with the button that you want to use on the car. Go to the garage door opener and press the learn button on the unit. Press the button on the car remote, then the two should now work together.


Where is the heater coil located on a 1986 Buick Riviera?

It is under the dash on the pass side and requires a bunch of work to get to it. Take it to a garage.


Buick 1992 riviera?

buick riviera '92. My dad had one and he loved it.


1988 Buick Riviera cold idle adjustment?

choke idle adjustment on 1988 Buick Riviera


Why does Buick Riviera backfires when you accelarate?

i have a 92 buick riviera that putters and chuggs when i accelarate but idles great


How much was a new 1969 Buick Riviera in 1969?

A 1969 Buick Riviera sold new for $4,700.