To pull off the head of an S10, first remove the air intake duct and throttle body. Then remove the alternator and the engine drive belt before gently pulling away the head.
Not knowing the year and engine size, you can disconnect the negative battery cable, drain cooling system, unbolt and disconnect everything attached to the head, unbolt head and remove.
you get someone with nails so they can get a good grip on it and pull it off but DON'T let it go it can get on someone else wash it down the sink
yes you can replace the head gasket. you can on all engines. you just gotta take the head off
Yes, they are the same from 98 and up.
No
You can pull them together.
Just pull up on it and wiggle at the same time, it will come off.
no the 98 is different
Throw the gum to the right side of his head. He will then try to pull the gum off but with also pull a whole chunk of hair off.
sounds like a head gasket. pull the oil dipstick and look for bubbles or a milky discoloration in the oil
You pull it, and it opens.
No, make sure if you have to pull off get the head or the tick will keep digging into your skin.
Turn radio off. Turn ignition switch on. (engine not running). Pull OUT seek button to change hours. Pull out scan button to change minutes.