opposite the way you took it off
The reservoir is located on the master cylinder in a Mazda 626. To add fluid, simply remove the reservoir cap and pour fluid in.
To fill the brake fluid in a 2001 Honda Odyssey, you need to find the brake fluid reservoir and remove the cap. Fill the reservoir with the right amount of fluid and put the cap back on.
in the brake fluid reservoir, somewhere along the back of the engine bay. the cap will say something like "brake fluid dot 4 only"
To put brake fluid in a Ford Focus, you need to locate the master cylinder, which should be on the drivers side under the hood. On this , you'll find the brake fluid reservoir. You unscrew the cap and replenish using the right brake fluid, and screw the cap back on.
Open the hood, by the fire wall in the back on the drivers side is the Brake fluid reservoir, unscrew the cap and fill it with the appropriate DOT brake fluid to the line.
To add brake fluid to a 2006 Jetta, you will have to take the cap off the brake fluid reservoir. Fill to the appropriate level with DOT 3 brake fluid and screw the cap back on.
First it must be determined which type of brake fluid a 95 Ford Taurus uses. More than likely it is Dot 3. To add this fluid, find the brake fluid reservoir on the master cylinder. Unscrew the cap to the reservoir and replenish your brake fluid to the fill line. Screw the cap back on.
you open the cap that says brake fluid, and then you pour it in
The brake fluid reservor is located at the back of the engine compartment near the firewall. The reservoir has a black cap with wires running into it - take off the cap and lift out the attached float mechanism - then pour in brake fluid up to the proper level.
You can purchase a disc brake tool for compressing the calipers at any auto parts dealer for about $8.00. You will also need to have the brake fluid filler cap off. You can purchase a disc brake tool for compressing the calipers at any auto parts dealer for about $8.00. You will also need to have the brake fluid filler cap off.
there is too much in the container If you filled the resevior with brake fluid PRIOR to replacing any of the brake linings, it will cause the fluid to "backflow" into the resevior, thus it will overflow and leak from the cap.
The brake fluid reservoir is under the hood on the driver side. The fluid is added to the master cylinder with the yellow cap back near the wiper cowl.