0
Just apply a small dab the size of a tic tac on both ends of the spark plug wire.
Also a small dab of anti seize on the spark plug threads will help as well.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
What type of grease is used in spark plug boot ends to inhibit corrosion?
Dielectric grease .
What caused emissions code P0302 on 01 mercury mystique?
misfiring on cylinder #2 ,usually you can fix with a new set of spark plug wires,it's important the use of a dielectric tune up grease,coat inside of spark plug boot with a layer of dielectric grease before snap boot onto plug,making sure fit is tight
Do you have to grease your new spark plug wires?
You do not have to but it will be very good if you place a die-electric grease on points where ignition wires contact spark plugs and distributor/coil pack.
Do you need to use dielectric grease on 2007 Tahoe plug wires?
Improves contact but not required, should still work without
Step by step how do you change the spark plug wires in a 1972 thunder bird?
Go to auto parts store and buy new spark plug wires. Arrange new wires, longest to shortet. Starting with the longest ones, remove old plug wires one at a time and replace them with matching length new ones. (length can be approximate) Do this until all wires are replaced. note: it's a good idea to get some dielectric grease from your auto parts store and coat both of your new spark plug wires ends before installing. Makes them last longer and also easier tune ups.
What would cause the plug wires on a 1998 Nissan Frontier 4-cylinder to keep popping out of the valve cover?
Too much dielectric grease on the plug boot, or they are worn out and need replacing.
How do you change the spark plug wires on a 2000 Chrysler Concorde?
A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.A 2000 Concorde does not have plug wires. There are individual coils on each spark plug.
How do you change plug wires 92 olds cutlass crusier?
Go to any auto parts store and purchase a set of custom fit plug wires for your oldsmobile. Make sure you get custom fit and not the generic. Remove the old plug wires one at a time. Only remove one plug wire at a time or you will get confused. Match the old plug wire with the new one of the same link. Install that plug wire and then move to the next one. Be sure and put a little dielectric grease on the inside of the spark plug boots.
Do you use never seize grease on the spark plugs on ford f 150?
It is recommended to use Nickel Anti-Seize on all spark plugs. It helps you to remove the plug without chance of breakage. I also recommend using some Dielectric grease around the porcelain to prevent heat from making your plug boots from sticking.
How do you get the spark plug boots off of a 1999 Chevrolet Malibu?
Twist them back and forth while pulling off. Use a dielectric grease when putting them back on. That will save you problems later.
How do you change spark plug wires for a 94 caprice?
The spark plug wires on your 1994 Chevrolet Caprice are quite easy to change. The spark plug wires simply lift off on each end. Put the new spark plug wires on and push until you feel a click.
How do you get the boot all the way down on the spark plug when replacing wires on a 2001 Olds Alero 4-cylinder?
Use silicon grease.
