looking for diagram how to put spark plugs in the right fireing order on a 1998 chev SUV 5.7 engin on distrubitor in order
you either did not gap the plugs to spec or you put this wires on wrong
A local garage is charging me $278-ish for plugs and wires on a 2007 Chevy Equinox today.
Remove the spark plug wires from your 1993 Chevy Astro spark plugs. Remove the spark plugs with a 5/8 deep well socket, by turning the socket to the left. Reverse the process to install the new spark plugs.
The main reason a car misfires is because the spark plug wires are not installed correctly. Check the car's firing order to ensure the spark plug wires running from the distributor cap to the spark plugs (in the cylinders) are in the right order. One or more spark plugs could be damaged or worn so the firing order is correct, but the spark plugs are not sparking into the spark plug wires to ignite the engine.
No the spark plug wires have to be in firing order
You can begin by removing the spark plug wires from your 1985 Chevrolet S 10 Blazer spark plugs. Use a 5/8 deep well socket to turn the spark plugs out. Turning the socket to the left will loosen the spark plugs. Reverse the process to install the new spark plugs.
Disconnect the battery, remove the spark plugs wires and boots and remove the spark plugs. Put in the spark plugs, replace the spark plug wires and boots, and connect the battery.
To tune up your Celebrity's engine: Replace the spark plugs, gap is 0.045". Put on new spark plug wires.
You will need to remove the spark plug wires on your Chevrolet 3.1 liter engine. Remove the spark plugs with a 5/8 deep well socket. Turn the socket to the left. The spark plugs will come out. Reverse the process to install the new spark plugs.
The Order is: Rear Spark Plugs 1-3-5 Front Spark Plugs 2-4-6
you would take out the spark plugs still attached to the spark wires. place the metal of the plugs onto a grounded metal spot. make sure they are not touching in order to prevent damaging them or blowing fuses.
Check firing order