Want this question answered?
Remove the inside door panel. The entire window mechanism will be visible. Put the window back onto the window track.
Remove the inside door panel of your 1999 Chrysler Intrepid. Remove the window retaining clips. Put the window back into the window track. Secure the window with the window retaining clips.
Generic Answer You need to remove the door trim. Then loosen the track, you should then be able to re locate the window into the track
Take door panel off. and put window back on track.
It probably hasn't fallen off the track. The part of the window regulator that attaches to the window is probably broken. Mine did the same thing. I took the window and regulator out of the car and epoxied the part back together and then reinstalled it. Been over a year now and still working fine.
Remove the drivers side inside door panel. Remove the retaining clips from the window track. Place the new window in the window track and tighten the retaining clips.
To put a driver's side window back on track on a Ford Expedition you will have to reseat the window. Do this by removing the door panel and putting the window back in place. You can use silicone or Gorilla glue to attach the window. Leave the window in the up position for at least one day once you have it back on place.
undo your door panle remove the to nuts that hold the window on the rail Slide Rail Back Put Window Downward Angle Pull The Window Out It Will Come Out Easy
To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.
How do I take the back panel off
Take your time and try to lift a side in order to put it back on track. No luck? Than you may need to use a flat screw driver and look under the window for the wheel that is off track and carefully pry that wheel up and slide it back into place.
Well I have no clue. go to a car store and ask them.