Want this question answered?
Filter it, you need something to catch all the organisms your killing. The filter pump will still recirculate.
First of I think you may be referring to the pool filter not the pump. "Filter" runs the water thru the filter thus filtering the water. Recirculate, I believe, bypasses the filter media and sends the water back to the pool unfiltered. K
I use filtration. But I also have a dedicated jet for my Polaris. If you do not have enough pressure try recirculate or try blanking one of your jets off. Either should work
THis indicates that the pump is struggling to push water through a dirty bed of sand when on filter. When on recirculate, the water bypasses the sand and flows through the valve back to the pool. Change your sand or run a cleaner through it.
Very rarely as a mater of fact only in an emergency most problems with pool water can be overcome with the right treatment. Take a sample of water into the local pool shop and get their opinion, this is usually a free service A: In Calif. - average about every 5 to 8 yrs. k
intex sand filter is not working on filter only working on recirculate position.....what should we do
Check the psi on the filter tank? If its lower than usual there is something stuck in the lines or jammed in the pump impeller. If its higher than normal, it just needs to be cleaned. Also, if you put the multiport handle into the recirculate position, this will bypass the filter. If everything works better in recirculate then you have a filter problem
Yes you can BUT all the debris will re-enter the pool as its not being filtered
you put your stomp in it
you put your stomp in it
Pump the water out or put a cover over the pool.
They use to have an adapter that would go from the hose to the inlet side of the pool which in turn went to the pump, most above ground pool use flex hose from the skimmer basket of the pool to the pump, you may just have to put a tee fitting in from the inlet side of the pool and add another inlet just so that you can vacuum, and cap this when you are finished vacuuming, this would be on the outside of the pool this would be added anywhere from the pump back to the pool on the inlet side.