By changing them one at a time. If already taken off, check a repair manual for firing order.
first remember the order of the wires. then individually remove the wires then take a extension with a 5/8 sparklug soacket and loosen it.
Answerbuy putting wires on right spark pi am Charles i need a firing order on a Chevy van 20 350engine v8 how doi put the spark plug wires on right
The main reason a car misfires is because the spark plug wires are not installed correctly. Check the car's firing order to ensure the spark plug wires running from the distributor cap to the spark plugs (in the cylinders) are in the right order. One or more spark plugs could be damaged or worn so the firing order is correct, but the spark plugs are not sparking into the spark plug wires to ignite the engine.
The left coil wires go to 1 and 4 the the right coil wires go to 2 and 3.
looking for diagram how to put spark plugs in the right fireing order on a 1998 chev SUV 5.7 engin on distrubitor in order
When you acquire the new wires, make sure to put a small amount of lubricant on the inside on both ends (for the distributor cap and spark plugs). Label the order the wires come off, and match the lengths to get them in the right order. If you're replacing the wires, it might be a good idea to replace the distributor cap and the spark plugs as well as to disconnect the battery for your safety. I worked from right-to-left, as the right-most wire is longest on my 91 si.
Possible problems: 1.Check the firing order of your ignition wires. 2.There could be a water inside of one of the spark plug socket,remove the spark plug and insert a clean dry cloth inside to dry-up the water.
You will see wires right on top of the motor. You can easily follow these wires to the spark plugs.
They have to be in the firing order.
Are you wanting to know the order of the wires on the engine or the distributer cap?
1,8,4,3,6,5,7,2 1,3,5,7 are on the left bank and 2,4,6,8 are the right bank.
what is the correct fireing order for each indiviual coil pack to each spark-plug, i need to know if i have the spark-plug wires connected to the coils in the right spot, and to the right coil