answersLogoWhite

0


Best Answer

Get a Haynes Manual, A Chilton Manual. You can get them at Autozone, Advance Auto, or Napa. They Run under $20. And they are very helpful.

User Avatar

Wiki User

โˆ™ 2006-03-24 21:02:29
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Add your answer:

Earn +20 pts
Q: How do you remove-install a transmission for a 93 mercury sable?
Write your answer...
Submit
Related questions

What is computer code PO412 on a 93 Mercury Sable?

it has to do with secondary air injection


Does a 93 mercury take transmission fluid?

It has a transmission, so yes.


What kind of brake fluid should you use in your 93 Mercury Sable?

dot 3


What car parts are compatible with a 93 Mercury Sable?

Ford Taurus parts of the same era.


Where is the backup light switch on a 93 mercury sable?

The 1993 Mercury Sable backup light relay switch can be found beneath the drivers side dashboard. The backup light relay switch will be above the accelerator pedal.


How do you adjust the transmission linkage on a 93 mercury topaz manual transmission?

The 1993 Mercury manual transmission linkage will have adjustment nuts on each end of the linkage. Turning the adjustment nuts will move the linkage back in forth.


Where do you put transmission fluid 93 mercury tracer?

On the 93 escort, brother to Tracer, there was only a breather valve at the top of the transmission and fluid needed to be added by removing an access bolt OR it had a small yellow dipstick at the top of the transmission.


How do you fix the belt drive on a '93 Mercury Sable?

I don't have an answere, but a picture diagram would help alot try going to "How stuff works"!


Will a auotmatic transmission from a 1991 Mercury Capri work in a 1993 Mercury Capri?

yes it will, just put a 91 in my 93......email me if you want....mjeffer@comcast.net


I have a 93 mercury tracer wagon it will start but will not go when put into gear i just put a new transmission filter in it what else could be the problem?

Your transmission may need transmission fluid, or you may have a blown transmission.


What kind of freon does a 93 mercury sable take?

Unless it has been converted over to R134 it came with R12. I suggest you convert it to R134a. R12 is very expensive.


How much transmission fluid does a 93 Mercury Capri hold?

3.5 quarts that's what they say at advance auto anyway.


What transmission fluid do you use for a 1991 mercury tracer?

I have a '93 ford escort 1.9, I always use mercron automatic transmission fluid. Use Mercon but do not use Mercon V.


How many miles a gallon does a 93 Mercury Tracer get?

I get about 21 mpg to my 93 mercury tracer it has 83,000 miles.


Where is transmission vacuum modulator on a 93 Chevy Suburban?

They were not used on that year model. The 93 transmission is computer controlled. Time to take it to a transmission shop.


Where is fuel pump located on 93 sable?

fuel pump is in the fuel tank


What kind of transmission does a 93 suburban 2WD have?

4L60E Transmission.


Where is the blower motor located on a 93 sable?

Chck behind the glove box area


What is the transmission in a 93 caprice?

700r4


Where is the transmission dip stick on a 93 Honda Civic hatchback cx?

Their is no transmission dip stick for 93 honda civic hatchback


What type of transmission does a 93 Lincoln mark viii have?

They have the 4R70W transmission.


Spark plug gap 93 mercury sable?

Check the Vehicle Emissions Control Information ( VECI ) decal , located in the front of your engine compartment ( it will show the type of spark plugs to use and the spark plug gap )


How many quarts of transmission fluid goes into an 93 infiniti j30?

how many quarts of transmission fluid goes into an 93 infiniti j30


How do you take out manual transmission on 1991 mercury capri?

You can find the 93 Capri Service Manual at http://www.techcapri.com/. Take pictures, mark what bolts go where. Good luck.


My 93 Nissan Pathfiner transmission won't shift into overdrive?

If your 93 Nissan Pathfinder transmission won't shift into overdrive, check the transmission fluid levels. Ensure the fluid is at the proper level.