Remove wheel and caliper. The only think holding it now is rust so smack rotor sharply with hammer to disengage. Couple whacks around the spindle, out on the edge, smack it on the face then from behind. Should pop right off.
Remove the tire and wheel from your 1999 Chevy Cavalier. Remove the brake spring and the caliper. The brake pads will come off. Tap on the rotor with a hammer or mallet. The rotor will slide off. Reverse the process to install the new brakes and rotor.
Remove the tire and wheel from your 1995 Chevy. Remove the brake assembly. Tap on the brake rotor with a mallet or hammer. The brake rotor will slide off.
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
You will need to remove the tire and wheel from your 1995 Chevy Cheyenne. Remove the brake assembly. Tap on the rotor with a hammer or mallet. The brake rotor will slide off. Reverse the process to install the new brake rotor.
Remove the wheel, remove the two caliper bolts and hang the caliper with a wire or bungee cord: you don't want any pressure on the brake hose. Then remove the two caliper carrier bolts and remove the carrier. The rotor just slides off after that.
The front brake rotor, on a 2004 Chevrolet Colorado, can be removed by first removing the wheel. Next, remove the brakes. The rotor will slide off
Remove the wheel,remove the brake caliper, it may have a clip on the lug nut stud, just grab it with needle nose plires and twist it till it breaks off and then the rotor should just fall off.
Remove the tire and wheel from your 1993 Chevy Lumina. Remove the brake assembly spring and the brake caliper. The brake assembly will come off. Tap on the rotor with a hammer or mallet. The rotor will slide off. Reverse the process to change the new rotor and brakes.
Begin by removing the tire and wheel from your 2004 Chevy Colorado. Remove the brake assembly. Loosen the brake rotor with a hammer or mallet. Slide the brake rotor off.
take the wheel off, remove brake caliper, remove brake caliper bracket and pull the rotor toward you or use a hammer. its not bolted on. it just sits on there.
Pull the wheel, pull the caliper and the rotor comes right off. You may have to tap the back side of it to loosen it up.
Lift the wheel in Question. Remove the tire. Remove the disc brake assembly. pull the rotor off. replace in reverse order.