0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you change the PCV valve on a 1989 Olds 3.8 ltr engine?
Remove the vacuum hose from your 1989 Oldsmobile 3.8 liter engine PCV valve. Remove the retaining bolts from the valve. Reverse the process to install the new PCV valve.
Where is the PCV valve on the 97 olds 88?
Standing in front of the engine, its on the left side of the engine intake. You'll have to remove that MAP sensor to get to the PCV Valve.
How do you change the PCV valve on 2000 Blazer?
Find the PCV valve towards the rear of the engine, and remove the PCV valve. Remove the rubber vacuum line, and discard the old Valve. Connect the vacuum line to the new valve and put the valve in its place.?æ
How do you remove the PCV valve on a 1997 Camaro 3800?
the PCV valve should be located on top of the engine block, on the passenger side. there will be 2- 10mm bolts holding it down and a plate will be labled (PCV) on it. simply remove bolts, the spring and the PCV valve should be sitting right there.
How do you change PCV valve on 2004 F-150?
Remove the PCV valve retaining screws. Remove the PCV valve hose. Reverse the process to install the new PCV valve.
Where is the PCV valve located on a 1992 deville?
PCV valve is located in front of the engine, behind plastic (long and narrow plastic cover that covers valves and fuel lines). You need to remove one hex screw that attaches plastic cover to engine and remove plastic cover. You will see pcv valve 3-4 inches to the right of the hex screw that was attaching plastic cover to engine. Once removed you will see silver pipe at the end of the pipe plugged in engine sits PCV valve. PCV valve plugged into engine by it's mettalic side, so only plastic side is visible. Easiest way to understand how PCV valve sits is to buy new valve in auto parts store, remove plastic cover that covers fuel lines in front of engine and find a part that looks like PCV valve.
Where is the pcv valve on a 1989 Buick Riviera?
The PCV valve is located just to the right of the alternator...take off the 3800 cover (usually gray in color), and its behind the alternator and to the right of it, and you will see it popping out of the engine block right on the top of the engine case....its best to remove the alternator...u have to remove it to get to the pcv valve and replace it....
Where is the PCV valve on a 98 s10?
There is no PCV valve on the 2.2 Liter engine.
Where PCV valve location on 2004 toyoto Camry?
The PCV valve on a 2004 Toyota Camry is located on the top, left side of the engine. It filters air which is circulated through the engine to remove harmful gas buildup.
How do you change ford 500 PCV valve?
Disconnect the PCV valve tube from the PCV valve.Disconnect the PCV valve electrical connector if it has one.Turn the PCV valve counterclockwise to remove from the valve cover.To install, reverse the removal procedure.
Where is the PCV valve located on a 1994 Ford Ranger 2.3?
On SOHC 4 cyl engine the PCV valve is mounted in the oil separator on the left side of the engine. On DOHC 4cyl engine, it is necessary to remove the driver's side inner fender splash shield to access the PCV valve. The valve is just behind the coolant bypass hose near the hose clip.
Where is the PCV valve on the 2001 mercury sable duratec engine?
The 2001 Mercury Sable PCV valve can be found on top of the engine. The PCV valve will be on the back side of the air cleaner housing.
