0
Awnser based on 2006 Highlander w/ 3rd row seat. To remove either of the split rear seat. 1) Carefully pry off trim pieces at front and rear brackets - 4 locations. 2) Remove side trim and trim near door threshold as needed (this is trim that will break possibly if seat removed without removing..I almost went there). 3) You can now see bright silver shiny bolts, 1 at front and either 1 or 2 at rear. Unscrew all of them, they need a 14mm socket and use larger socket driver as they are torqued ~40 ft-lb. 4) You can now remove seat by pulling up - there are guide pins at front so may need to move slightly forward while pulling up. I performed this procedure to remove left side rear seat (includes center section) to re-clip upholstery clips which had mysteriously become loose. Installation is of course reverse of the removal. Another bonus - have a vacuum, towels and cleaning detergent handy to clean up all of the junk that has dropped down below the seat!
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you remove a Toyota Highlander 2nd row seat?
Do you want to REMOVE it entirely from the vehicle, or are you asking how to lay it down flat in order to make a longer rear deck floor?
How do you remove rear seat of Toyota Corolla?
The type of the rear seat of the Toyota Corolla will determine how you will remove it. For instance, for a folding seat, all that you will need to do is to lower the seat to gain access.
How do you remove the rear seat on 2007 Toyota Camry?
How do you remove seats in a 2007 Camry SE
How do you remove rear seat from 1997 Mercury Villager?
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
How do you remove rear seat in 2003 Toyota Corolla?
Go to the nearest mechanic he'll help you out :D LOL
How do you remove the rear cup holder on a 1998 Corolla LE?
To remove the rear cup holder on a 1998 Toyota Corolla LE, first remove the seat. Then remove the four bolts holding the cup holder housing.
How do you remove the rear seat of a 2001 sonata?
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
How do you remove the rear seat on the 1997 Mercury Villager?
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.
How do you remove the back seat of a 1998 Toyota Corolla?
To remove the back seat of a 1998 Toyota Corolla, you will need to remove the carpet to expose the bolts for the seat. Then, loosen the bolts by removing the nuts. You can then remove the seat.
How do you remove the rear seat of 1997 Mercury Villager?
The rear seat is not intended to be removed. You can remove the center seat and slide the rear on forward into it's place.
How do yo remove rear seat of 2002 Mitsubishi Diamante?
How do you remove the rear seat on a 2002 diamante
How to replace fuel pump 1991 Honda accord?
Remove rear seat and panel underneath seat. How do I remove rear seat?!?!
