Want this question answered?
First remove the bumper cover. You need to take off the front grill to get at the plastic retainers that hold the top of the buimber on. There are about four retainers on the bootom of the bumper.
behind the bumper, there are 4 bolts , 2 on each side.
You can now order a well-designed front bumper form online stores like BumperOnly and they will ship the product along with installation material and guide with it. You can easily follow the instructions and replace the bumper yourself.
how do i remove the front bumper and small splash guard underneath it or does the shield have to be removed at all?
There are four Torx head bolts that hold the bumper to the frame. Two on each side, one on top and one on the under side.
On my 2000 grand cherokee, It was in front of the battery on the fender wall. Remove battery and you should find it. It is under the bumper cover, under the passenger head light. You either have to remove the front bumper, or you remove the headlight and cut an access hole.
The correct size Torx bit is a T-55.
First remove the front clip (headlights and grille and plastic covering the bumper.) The rest will be obvious.
Jeep Comanche was created in 1985.
its 500lb toung weight that's the weight on the bumper os hitch. the trailer weight is 3500lbs. make sure your bumper bolts are tight on the frame if pulling from the bumper
7mm Allen
The radiator fan relay has failed. The relay is under the front bumper cover under the right front headlight. The easyist way to access the relay is to remove right front headlight and drill a 1.5 inch hole to remove. Otherwise the entire front bumper has to be removed.