An easy-out might work. Otherwise try tapping it all the way into the engine with a punch or something. It will lay in the bottom of the oil pan and won't hurt anything.
You would probably have to follow the dipstick tube to where it meets the engine, remove the bracket bolt and either remove the tube or lift it up to push the dipstick up or out of the tube.
You'll have to remove dipstick tube first and then push broken dipstick out from the bottom side up. Before removal of the tube clean surroundings to avoid dirt from getting into engine.
how to remove broken dipstick tube ford winstar
In many vehicles, the dipstick tube can be removed. Check and see if this is possible on your vehicle. If so, just remove the tube from around the dipstick. There should then be enough of the dipstick sticking out from the engine to grab on to.
Cut the dipstick tube with a tubing cutter below broken dipstick and remove Use rubber tubing and hose clamps to reattach tube pieces
If the dipstick has broken off into the tube on a Nissan Altima, you can remove it using pliers. Other people have had luck using industrial strength vacuums and sucking the broken dipstick up.
Cut the tube with a tubing cutter- remove dipstick and use rubber tubing and hose clamps to reassemble dipstick tube what up.
The transmission fluid dipstick is located on the passenger side near the top rear of the engine. With the engine running, remove the dipstick and check the level on the stick.
Yes!
The tube is located on the left side of the engine, or the passenger side.
generally to remove a broken bolt, you will need a drill and an easy out
While engine is off, remove oil dipstick, wipe oil off with rag, then insert it, remove it and look at level (dipstick will have minimum and maximum points).