0
How do you remove a broken valve cover bolt on a small block Chevrolet?
Wiki User
∙ 14y ago
the easiest way is to drill it out. drill a hole thru center of broken bolt, make sure it is smaller then the diameter of the bolt. after drilling use a easy out to remove the threads of the bolt. check that the threads in the head are ok! then put in new bolt.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
How do you replace the timing cover on a 1981 Chevrolet Malibu?
You will need to remove the fan and the water pump. You may have to remove the radiator to be able to have room to remove the balancer. Remove the bolt in the center of the crankshaft. Using a puller , pull off the balancer. Remove the bolts surrounding the timing. Pry the timing cover from the block. I do not know your reason for doing this but if you are wanting to remove the seal you DO NOT have to remove the timing cover.
1997 dodge neon sohc timing diagram back cover on cam is broken how do i line it up?
Remove cam gear, remove broken back cover, replace back cover, replace timing belt.
How do you change the light for the rear license plate on a 1999 Chevrolet Camaro?
Remove the cover using a tork bit.
Where do you add the oil in a Chevrolet inline 6 250?
remove the air breather on the valve cover add oil there
Why is Rattle coming from valve cover?
Loose, broken, or worn valve train component. Remove the valve cover to find the problem.
How do you fix a broken valve cover bolt when you cant grab the broken bolt still in the engion?
I have good news and I have bad news. First the good news - Christmas is coming. Now the bad news - It seems the only way to remove a broken bolt from an engine block is to drill it out - see you local mechanic for further details
How do you remove the heater pipe from the engine block?
how to remove timing cover with heater pipe attached 92 olds 88 3.8l
Where is the oil pump on a 6.0 Chevrolet?
It is on the front snout of the crankshaft behind the timing chain cover. It bolts to the front side of the engine block. In order to replace it, one would have to remove the water pump, harmonic balancer/crank pulley, and timing cover on front of engine just to access the pump. Then the oil pan would have to be removed to access and remove the oil pick tube.
How do you fix a broken valve cover bolt on a Chevy 1500 with a 5.3?
Remove the broken bolt and replace it with a new one. There are several ways to remove that broken bolt. You can remove the valve cover and weld a nut to what is left of the bolt, wait for it to cool off then unthread the broken bolt. You can also drill out the center of the broken bolt and use an easy-out. You can also drill into the broken bolt with a left handed drill bit, sometimes the drill bit will catch and spin out the broken piece. I would go with the first suggestion.
How do I replace the thermostat on a 1993 Chevrolet Corsica?
ok you look on the front of the block....take the thermostat cover off..then take the old one out and put the new one in and put the cover back on.....
How do you remove plaster from concrete block walls?
With a masonry chisel. It may be easier to cover it with a new surface.
Where can you find a diagram of a 2004 Chevrolet Trailblazer fuse block?
each fuse box has a plastic cover has all the info. you need , olso you will find this in the manual
