You have to get a pulley puller of the appropriate size. Without a pulley you have no chance safely to remove it. Be careful do not deform the pulley it's not that hard as you can think.
To remove the window crank on the 1992 Toyota Paseo, first pry off the interior door panel. Then, access the screw that holds the crank in place. Remove the screw and the handle will come loose.
the timing mark is on the pullie itself its a small notch .... to get to your timing belt you have to remove the belts, motor mount, and the pullies, then remove the plastic cover then you can access your timing belt .... it looks worse than it really it
Remove the lower timing belt cover and then the sensor should be to the right of the crankshaft pully.
jack up front of car remove left front undercar cover sensor found under crank shaft pully remove connector and measure resisitence of sensor aprox 900 to 1800 ohms
No
it has no crankshaft sensor
Remove the inside door panel of your 1997 Chevy Lumina. Remove the linkage to the window crank. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
I have no experience on that particular model but they are usually held in place by a spring-clip. Gently push a broad blade screw-driver between crank and door lining and you should see it. Remove with fine long-nosed pliers. Replace in same way.
You will need to remove the inside door panel of your 1977 Chevrolet blazer. Remove the window crank linkage. Remove the window crank retaining bolts. Reverse the process to install the new window crank.
Gu
how do i remove the crank senor on the e320 Benz
That year did not USE a Crank sensor.