The 1998 Ford Ranger door panel has eight retaining clips. Pry outward on each retaining clip. Remove the two door handle screws.
To remove the door panels in a 1987 Ford Ranger, simply crank the cover on the door to pry it open. Then remove the head screws inside and take off the other three screws.
What you do is you fart
Removing the door panels on a 2000 Ford Ranger is easy. All you have to do is snap out the old panels by unscrewing the bolts and screwing in the new ones.
Listed in your owner's manual and on the driver's door post.
The stock tire size is probably on the driver's door placard (assuming it is original door).
remove the window handle, remove screws from armrest, remove the inner door handle and the screw on the lower rear of the door panel, lift the panel upwards to remove from the slots along the bottom of the door.
YOU MUST REMOVE DOOR AND WINDOW HANDLES, ARM REST AND THEN YOU CAN POP THE DOOR PANEL WITH A LARGE SCREWDRIVER OR A REMOVAL TOOL FOR THE PASTIC PUSH IN RETAINERS
Remove all the screws. (There are 2 under the "Close Door Handle" Then, simply lift up the panel. David
Pull the door panel off, remove the door latch assembly from inside the door, and replace the switch which is hold onto the latch with one screw on the backside of the latch.
you have to remove the door pannel, theres about 3 bolts you have to undo to remove it from the door, but you have to take the inside door pannel off, like where you rest your arm on the door.
To remove the rear seat from a 1989 Ford Laser 4 door car, first remove the bolts anchoring the rear seat to the floor of the vehicle. Then, lift the bottom portion of the seat from the car. Then, remove the internal bolts from the hatchback or trunk of the car to remove the seat back.