This really depends on the model year. On my 97 Bonneville (which is the same from 92-99) there are 3 bolts hidden. One is beneath the interior light. The way you can get these off is a small flat head screwdriver. Just lightly pry at the rear of the light. There is a small clip that holds it on. Be careful though. This part is very easy to break so be careful! The 2nd is under the panel above the door handle. the same panel as the rear veiw ajustment switch.
The 3rd is under the door handle. Just lightly pry the panel behind the handle with a small flathead screw driver.
Behind the panel itself are some plastic fasteners. These are pretty difficult to get off. As they do get stuck. The easiest way is to use a pair of needle nose pliers to gently ease them out. I do believe there are about six of them. Next is the power window switch. All there is to do is find a slotted opening to get a small flat head screwdriver inside to press a metal clip to release the housing itself. Everything pulls out including a cluster of wires. This cluster of wires plugs into the back of the window switches. Just release the clips and then wiggle the plug loose. After doing that, release the lock handle loose just jiggle the handle until you hear a click. then just pull the trim around the handle loose. Then, just gently lift up on the panel to work the top loose. That should take care of it! GOOD LUCK!!
How to remove left inner door panel of a Pontiac Bonneville 1996
The 2002 Pontiac Bonneville rear door panel is held in place by eight retaining clips and two screws. Remove the screws that can be found near the door handle. Pry outward on each retaining clip to remove the door panel.
How do you remove the right rear door panel from a 2002 Bonneville sle
Open the driver's side door and remove the panel on the side of the dash. If not there, then the passangerside of the dash.
fuse box fuse for the door lock
Take a flat screwdriver and pry all around the bottom edges. Then remove the mirror switch and remove the bolt behind it. Next remove the white door light cover and assembly, remove 2 screws behind it. Next lift up on door panel disconnect all wires
you have to remove the whole door panel in order to gain access to the factory speakers in which should be 4x6.
how do you replace a blend air door assembly on a 2000 pontiac bonneville
locate blend door actuator for 1997 pontiac bonneville se
Under the steering wheel, probably on the left side near the door panel.
just remove it
You will need to remove the inside door panel in order to replace the side mirror. With the door panel removed you will find the side mirror is held in place by two retaining bolts. Remove the retaining bolts. Reverse the process to install the new side mirror.