Want this question answered?
The spindle of a lathe is a rotating hollow tube within, and protruding the head stock and to which a chuck, drive plate or facing plate attaches and rotates to enable machining. It is housed within the head stock in bearings and has some gears around it which is driven by other gears which in turn is driven by an electrical motor.
ERW: Electric Resistance Welding tube - tubes are rolled and joined With welding - fin cut is there CRW: Cold Drawn tube - without fin cut - Draw process
Take a tube, put a piston in it, seal off both ends of the tube, and use a liquid, or gas to put pressure in and remove pressure from the tube. As the fluid or gas goes in the tube, the pressure pushes the piston out. As the pressure is released, the piston can recede.
A tube connector is the standard fitting that goes on a tube or hose. A tube adapter fits to a tube or hose and enables it to connect to a fitting of a different size to its standard.
it is difficult to remove the scales. we cannot use scale forming fluid through the shell because if we pass, the scales are formed and it corrodes the shell.
draw tube holds the eyepiece or the ocular
the function of draw tube is a ...............
No, they are not the same. The draw tube holds the ocular while the body tube holds the lenses.
red tube
What color tube for blood draw for metal
blue tube
what color tube to draw HepB titer blood test
Light Blue Top Tube
Draw long tube through out the cell
It depends on your lab, but for most, it is a mint green tube and you only need to draw 1
it supports the upper part of the microscope where the eyepiece, draw tube , body tube and the objectives is placed .
red topped tube