The complete hub and rotor assembly have to be removed in order to drive out wheel studs to separate the rotor from the hub. So, remove wheel, remove caliper, remove caliper bracket, remove axle retaining nut, remove 4 bolts holding hub assembly to spindle, dissconnect ABS sensor harness, remove hub assembly, remove all wheel studs then separate rotor from hub.
Its on the front of the crankshaft in front of the timing chain.
The C2500 is 2wd and k2500 is 4wd.
On the front axle, passengers side of carrier housing.
The wires going into the AC pump 1995 Chevy K2500 are the red-marked wires.
No
The rated horsepower of a 1999 K2500 Chevy truck is 255. The base engine is a V-8 that is 5.7 cubic liters.
Go to your local auto parts store and ask them for an easy out bolt extractor.
18436572
The gross weight of a 1988 Chevy Silverado K2500 with a 5.01 engine is about 2.5 tons. This is equal to about 5,000 pounds.
6zktpdot 3
cant there is no fitting on these trucks I know ,I have an '88 Gmc Sierra You have to remove the fuel filter and splice one in
Need to know what year and model the truck is. 1992 Chevy k2500