Want this question answered?
Without the key you are going to have to drill it out.
you don't.
Removing a ignition lock cylinder from a 2002 ford windstar with no key
Not without picking it over or breaking it. The switch needs to be turned, and the retainer depressed to remove the lock cylinder.
You will need to remove the retaining ring at the top of your 2003 Kia ignition cylinder. The ignition cylinder will slide out. Remove the wiring harness from the back of the ignition cylinder.
how to remove key cylinder on 98 sunfire
on an older car you put the key on accessery, push a needle in the little hole in the cylinder then turn the key to the left and pull on the key
verry carfully
how do I remove the key switch from a 1998 ford contour You have to remove the plastic trim around the steering column (behind the steering wheel). Put the key in the ignition cylinder and turn one click. There is a small hole on the side of the ignition cylinder, stick a small screwdriver into this hole and press hard. Pull out the ignition cylinder with the key.
to remove simply move the steering column cover then move the key forward under the cylinder there will be a silver button push in and pull out the cylinder with key at the same time
As a general rule you can't. There is a retaining pin, screw, or nut that cannot be accessed or made to release the cylinder without the key being unlocked (cylinder in a certain position) - this is to prevent theft.
Take the door panel off and remove the lock cylinder. Bring the cylinder to a locksmith to get a new key made.