i have a 1998 grand cherokie 5.9 how do i remove the pulley what tool do i use
simple pulley simple pulley
a flag pole is a pulley
A fixed pulley is a pulley that is attached to a support. It does not reduce the effort needed to lift the load, but rather changes the direction of the applied force.An example of a fixed pulley would be the rope pulley on a well. This is a fixed pulley because the pulley doesn't move (it is attached to the overhead structure).
well i know 3, fixed pulley, movable pulley and a pulley system (double pulley with fixed and movable pulleys). i guess its basically just the first 2.
Pulley is a noun, as in "the pulley helped lift those pallets over there".
remove all belts,tensioners etc, remove pulley bolt, use HARMONIC BALENCER PULLEY to remove - DO NOT USE NORMAL PULLEY REMOVER - must be pulled from center of pulley not from outer edge
It requires a special puller to remove the pulley. There is NO bolt are Allen head that has to be removed. The pulley is pressed on. You will also have to get a special tool to put the pulley back on too.
u need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removalAnsweru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal Answeru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal
Take off the sockets and remove the pump pulley.
power steering pulley is pressed on. to remove pulley, u need to completely remove pump from vehicle and take it to a mechanic that has right tools for removing
depending on the pulley, you must remove the belt and the bolts holding the pulley in place. some cars have pulleys that are harder to remove and have what is called a torx nut. this requires a special socket. it is easy to remove a pulley if you start with the belt on so it doesnt move
Depending on engine displacement in general remove belt-s then bolt holding pulley to the crankshaft then using a puller remove the pulley, when installing use a installer not a hammer to put the pulley on the crankshaft.
If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.If you are referring to the Serpentine belt, you loosen no pulley. You simply remove tension from the belt. The tension is applied by the Idler Pulley. Pry the idler back and remove the belt.
There is a bolt that is blocked by the pulley. In order to remove the pump you need to remove that bolt. So you need to remove the pulley first to get access to that bolt.
To remove a crank shaft pulley you need to first jack up the car. Next, remove the bold holding the crack shaft pulley in place and remove the unit. Reverse direction to put the new crank shaft pulley on your car.
Remove serpentine belt. Remove pulley. Install new pulley. Install serpentine belt.
Remove crankshaft pulley& ballance