Open the tailgate, remove the retaining cables from the studs, pull out on the passenger side of the tailgate.
big hammer
To remove the tailgate lock on a 1989 S-10 Blazer, first remove the cover over the inside of the tailgate by removing the bolts on the side and on the handle. Pop the vinyl away from the tailgate. Then remove the bolts holding the lock on and remove the lock.
Remove the tire and wheel from your 1995 Chevy S 10 pickup truck. Remove the ball joint retaining nut. Pound the ball joint out with a hammer.
yes
I am unable to remove the starter from under the vehicle no room for it to slip out What can I do !
The fuel pump is in the fuel tank, you need to remove the fuel tank to remove the fuel pump.
You need to order the part(s) first, which you can do at your local Toyota dealership or at an auto parts store. Then, you simply disassemble the tailgate, remove the defective latch component, and put in the new part, and then reassemble the tailgate.
remove the two screws from the lens, open the tailgate and remove two more screws, twist the plug from the back side of the lens to expose the light, twist and pull out the bulb
I had to remove the bell housing, otherwise the starter lacked about a 1/4 of an inch from being able to get it off.
I had this issue on my '87. I pried the plastic panel out of the channel enough to work the prybar into the latch and work it open.
How do you engage four wheel drive on 1995 Chevy S-10?How do you engage four wheel drive on 1995 Chevy S-10?
where is the fuel shut off swith on a 1995 Chevy s -10 blazer at