i have done this job and its a pain in the butt big time. first you pull the tire and the get the brakes and caliper and bracket off. then you need to pull the tie rod end with a puller which you can rent from the store and you will need a axle pusher which you need to get a larger one then a normal one. 4 wheel drive because the lug pattern is to big for the small one. then you need to get the lower ball joint nut and pull that off the control arm. now its ready to get the axle to slide out of the wheel bearing. and there are two different ones make sure you get the right one. the axle i had stuck really bad had to use heat and penetrating oil to get that lose then the bearing was seized and had to heat that and keep banging that with a hammer to get it out. i found evpo-rust works really good for rust,takes about 2-4 hours to get stuff lose but its worth it if you dont have to bang your fingers and burn your truck. found it online and autozone is where i got it in Maine.
you don't. you buy a new Saturn
Saturn Vue was created in 2002.
I have a 2002 Vue and the bolt pattern is 5x115.
How do you change the serpentine belt on a 2002 Saturn Vue 6 cyl
remove 2003 Saturn vue radio
Saturn didn't start making the VUE until 2002; are you certain you have a 2001 VUE?
How do you change the serpentine belt on a 2002 Saturn Vue 6 cyl
134 A is used in the 2002 Saturn
No. They are All Wheel Drive or Front Wheel Drive
i have 230xxx on my 2002 Saturn Vue and i never replaced the clutch
Steering Wheel Air bag!
how to bleed 2002 saturn vue 3.0