0
How do you remove and replace the driver's side door latch on a 1995 Ford Explorer?
Wiki User
∙ 19y ago
The door handle/latch assembly is a single piece that is riveted to the door. I needed to replace mine because the springs that place tension on the door handle had snapped. I removed the interior door elements using a flat bladed plastic rivet popper. There are also various screws that attach the armrest and window controls, however, it is fairly straightforward. Once the interior door components are removed, you will have partial access through the metal door to the handle/latch assembly. I purchased a new handle/latch assembly from Ford for about $30. I carefully drilled the old rivets out from the exterior and disconnected the metal rod that controls the latch on the door edge. You will be able to remove the assembly at this point. Since I did not have comparable rivets to re-attach the new assembly, I found short pan head bolts with lock washers at the hardware store. The bolts are flush from the exterior and are visually hidden by the handle. Re-assemble in reverse. Repair is over 1 year old with no reported problems. I have photos of the handle/latch assembly from inside the door if you need further info.
Wiki User
∙ 19y ago
Add your answer:
Earn +20 pts
Where do you locate the door mechanism on the 1998 Mazda B4000 that regulates the cabin light?
It is in the door latch. You need to replace those switches. There are two in the drivers door and one in the passengers door. Take the door panels off and remove door latch and replace swithes.
How do you remove and replace your door ajar sensor on your 2000 ford ranger?
Pull the door panel off, remove the door latch assembly from inside the door, and replace the switch which is hold onto the latch with one screw on the backside of the latch.
If the drivers door on a 1989 Accord will not open but everything appears to be connected how can you get the door open to replace the latch?
I have dealt with this problem before at our bodyshop. Basically, a spring inside the latch has broke, and now there is no way to release the latch, even by manually pulling on the release lever at the latch. Prepare to replace the latch, as it is not repairable. Be prepared to be working inside the car. To make it easier to work, unbolt the seat, and remove from the car. Remove the door panel, and also the door handle. You will have to chisel at the plastic part of the latch, and break it off bit by bit. Eventually you will be able to release the latch. good luck
How do I remove and replace the convertible top latch on the passenger side for a 1992 VW Cabriolet?
Very simple fix. Just remove the two screws you see on the latch. That will remove it from the top. Replace with the new one and you're good to go.
How do you change the air filter on a 1999 Toyota Avalon?
Find the air filter housing, the big black unit on the drivers side under the hood. It has clips that latch it into place. remove the clips and lift the cover, replace the filter and return the cover and re-latch it.
How do you keep door latch from freezing on 2002 ford explorer drivers door?
I wish I had the answer to this, my 2002 explorer does the same thing and it is driving me crazy ! I have tried everything. Hope you get some answers!!
2002 vw jetta door sensor locations?
I am having an issue with my drivers side door sensor. I have yet to do anything with it, but from what I know about VWs (i have owned and worked on them for 12 years) the door sensor is located in the door latch. I am currently looking into whether I can replace just the sensor or if i have to replace the whole latch...I read that the latch costs about 150.00. to install it, you would have to remove the door panel which can be tricky.
What size tires for a 1999 Explorer?
Open the drivers door and on the latch pillar is an information sticker that shows the original size tires on the vehicle from the factory
How do i fix a 1994 gmc suburban door latch that's stuck and the door won't shut?
Remove door panel and replace latch mechanism
How difficult is it to repair or replace the hood release cable on a 1999 Ford Explorer?
OneUnder the hood.... Remove the deflector pins, and remove the deflector. Remove the hood latch (16700). Remove the bolts. Remove the retaining screw, and disconnect the cable. Disconnect the two push-in clips holding cable in engine compartment. Inside....... Remove the cowl side trim panel above the brake handle. Remove the screws, and remove the hood latch control handle and cable.InstallationFollow the removal procedure in reverse order.
How replace a broken rear hatch latch?
(1) Open the liftgate. (2) Remove the trim cover and latch mounting screws. (3) disconnect the actuating rod - detach electrical connectors (if any) - then remove latch from liftgate. Installation is the reverse of removal.
How do you get door to shut on explorer when latch is messed up?
install a new latch
