Using the provided tools in your tool kit remove the seat. There is one 10mm bolt at the very rear of the seat and two Allen hexed bolts, one on either side below the seat. Once the seat is removed you will see a plastic plate or cover with a large wiring harness plugged into it. Remove this cover which is held down by three Phillips head screws. Next disconnect the battery leads at the terminals, first the black or negative one then the red or positive one. Finally grab a hold of the battery and lift straight out.
reverse steps to install.
How many amps vtx 1300 battery
12 volt
YTX14-bs
Put a battery charger on it.
under the seat.
You can remove the drain plugs, on your VTX 1300, by loosening the plugs with a 5/8 five sided socket. Turn the plugs to the left to remove them.
try this link www.vtxcafe.com it has all VTX related answers
You have to drop one of the forks.
you will have to install a plug onto the battery terminals
check out www.bareasschoppers.com. has a very good explanation with pics
about 76hp
will 750 shadow pipes fit 1300 vtx