Hi the far than I know it to take off the cover glove box and take off 4 or 5screws and disconect the wire harneses and pulled towards
Resistor is a separate unit from the blower motor
It will be located somewhere in the path of the air that the blower motor blows.
The Resistor is located on the outside of the blower motor. Have to remove the blower from under the glovebox to get to it. The Resistor is located on the outside of the blower motor. Have to remove the blower from under the glovebox to get to it.
Fig 15 Blower Motor ResistorNOTE: The blower motor resistor is located on the lower right side of the heater housing.REMOVAL# Remove lower right underpanel silencer/duct. # Disconnect wiring connectors on blower motor resistor. # Remove blower motor resistor retaining screws. # Pull blower motor resistor out of heater housing.
The a/c heater blower motor resister is located in the vehicle on the passengers side inside the housing next to the blower motor...............Remove the blower motor resistor wire harness connector.Remove the blower motor resistor screws.Remove the blower motor resistor.
# Locate the blower resistor under the right-side of the instrument panel # Disconnect the electrical connector from the blower motor resistor # Remove the blower motor resistor mounting screws and remove the resistor from the housing # Installation is the reverse of removal
Blower motor: remove the glove box and you will see the blower motor and blower resistor.
Pull out the lock on the blower motor resistor wire harness connector to unlock the connector latch . Depress the latch on the blower motor resistor wire harness connector and disconnect the connector from the resistor. Remove the two screws that secure the blower motor resistor block to the HVAC housing. Remove the resistor block from the HVAC housing............
The Blower Motor has a resistor attached to the blower motor itself. I'm not familar with a relay for the motor. I think you have to remove the Blower Motor itself to get access to the resistor. The blower motor is under the dash on the passenger side. It's like 3 maybe 4 bolts to remove.
the blower is located behind the clove box, you have to remove the clove box to remove the blower.
Remove the glove box (six Phillips head screws). Above the blower on the blower housing you will see a white electrical plug with a Phillips head screw just in front of it. Below this plug is the resistor. Remove this screw and and the resister will be able to be accessed.
The resistor is located to the lower right of the blower motor. You will need to remove the battery to access it