Determine the problem :
1) worn brake pads causing a low fluid level in master cylinder?
2) Low fluid level in master cylinder due to a leak in system?
3) Parking brake not fully released?
2) low f
how do you remove service warning light on 307
The 'P' symbol in a car sybolizes a warning that your parking break is, or is not on. Depends on your model
It's low break pads. you have to check the brake pads and need to be services. please note that it come with break sensor. to remove the light u may required to change the brake sensors
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
You can turn off the 2009 Toyota Camry seatbelt warning light by engaging the seatbelt. You can also remove the seatbelt warning light fuse. Removing the seatbelt warning light fuse is not recommended.
check the lights could be a break light head light or running light is out
The transit brake warning light, on a Ford, can be reset by changing the brake pads. If the warning light is still on after changing the brake pads remove the fuse for 10 seconds.
check your break fluid.
Hi I have 2005 Toyota Matrix.I reset this " low tire pressure warning light."1. have your keys in ignition and turn to "ACC"do not have your engine start.2. push the reset button ( located lower left hand side of the steering wheel)( in Matrix it is middle one and the label same as the amber warning light.)keep it pressed for 10 seconds. ( amber light will flash and turn off)3. turn on and off the engine.This worked for me .
Remove battery cable for one minute .
The brake warning light comes on in your dash if the emergency brake is on or the brake fluid level in the brake master cylinder in your engine compartment is LOW
remove the sensors and clean it. then put it back. if the warning light is still replace the sensors it is cheap