0
How do you remove crankshaft harmonic pulley for 2004 Nissan xterra v-6?
Wiki User
∙ 12y ago
You will need to first drain and remove the radiator to give clearance. Then, you have to loosen and remove all three accessory belts. Also, you will need a 2 or 3 jaw gear puller. Remove the bolt holding the pulley on by using a large breaker bar. To do this, you will have to put the emergency brakes on HARD. Then, using the puller, remove the crankshaft pulley.
If you are doing this to change your timing belt, you will have to remove a bunch of other stuff.
Good luck.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
How do you remove a crankshaft pulley on a 67 Chevelle?
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
How do you remove crankshaft pulley bolt from a Nissan Pathfinder is it right or left hand thread?
1998 Nissan pathfinder crankshaft pulley bolt is right handed.
How do you take the pulley off the crankshaft on a vauxhull frontera 2.2 diese l turbo?
Remove bolt, and use a harmonic puller to remove pulley.
How do you replace the crankshaft pulley on a 1991 Chevy S-10 4.3L?
Disconnect the battery and remove the fan assembly and crankshaft belts. Remove the center bolt from the pulley and use a crankshaft pulley remover to pull off the pulley. You can usually borrow one from an auto parts store.
How do you remove crankshaft pulley on Nissan Xterra?
You will need a tool called a puller to remove your crankshaft on your Nissan Xterra. You can purchase this toll at most auto parts stores, or borrow one from a shop or another mechanic.
How to remove crank pulley?
On most newer cars, the crank pulley is one piece with the harmonic balancer.... Remove it with a harmonic balancer puller.
How do you remove a harmonic balancer on a 2000 impala 3.8?
Take the serpentine belt off and then take the crankshaft pulley off and you will need a puller to get the balancer off the crank.
How do you remove crankshaft pulley 1984 f150 6cyl?
Remove any bolt on pulleys, remove center bolt counterclockwise, remove the harmonic balancer with proper puller available for rent or sale at your local auto parts store.
Remove Taurus harmonic balancer?
Remove belt,4 pulley bolts and remove pulley. Remove harmonic balancer bolt and washer,reinstall bolt with out washer,just in about half way.You will need a harmonic balancer puller.These are not very expensive about $20.00 or borrow one from somebody.You just thread the correct included bolts into the balancer where you removed the pulley bolts and will be pushing on the reinstalled balancer bolt.The balancer should clear the bolt head without the washer.This is so you don't damage the threads in the crankshaft.
What tools do you need to remove the crankshaft pulley pn 1995 Honda Passport?
What tools do you need to remove the crankshaft pulley on a 1995 Honda Passport?
How do remove a 1996 Chrysler damper pulley?
Depending on engine displacement in general remove belt-s then bolt holding pulley to the crankshaft then using a puller remove the pulley, when installing use a installer not a hammer to put the pulley on the crankshaft.
How do you repair a crankshaft pulley for a 98 Saturn SC2 DOHC?
u need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removalAnsweru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal Answeru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal
