0
Add your answer:
Earn +20 pts
How do you remove crankshaft pulley bolt from a Nissan Pathfinder is it right or left hand thread?
1998 Nissan pathfinder crankshaft pulley bolt is right handed.
How do you remove crankshaft harmonic pulley for 2004 Nissan xterra v-6?
You will need to first drain and remove the radiator to give clearance. Then, you have to loosen and remove all three accessory belts. Also, you will need a 2 or 3 jaw gear puller. Remove the bolt holding the pulley on by using a large breaker bar. To do this, you will have to put the emergency brakes on HARD. Then, using the puller, remove the crankshaft pulley. If you are doing this to change your timing belt, you will have to remove a bunch of other stuff. Good luck.
How do you change a distributor on a Nissan Xterra?
How do you remove a distributor on a 2000 nissan xterra
How do you remove and replace the front rotors on a Nissan Xterra?
how do you change the rotor in 2000nisan xterra
What tools do you need to remove the crankshaft pulley pn 1995 Honda Passport?
What tools do you need to remove the crankshaft pulley on a 1995 Honda Passport?
How do remove a 1996 Chrysler damper pulley?
Depending on engine displacement in general remove belt-s then bolt holding pulley to the crankshaft then using a puller remove the pulley, when installing use a installer not a hammer to put the pulley on the crankshaft.
How do you repair a crankshaft pulley for a 98 Saturn SC2 DOHC?
u need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removalAnsweru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal Answeru need to buy new pulley then, remove serpentine belt from engine remove bolts that hold pulley to crankshaft remove pully instalation is exact opposite of removal
How do you remove a crankshaft pulley on a 67 Chevelle?
The crankshaft pulley unbolts from the harmonic balancer. The harmonic balancer can be removed from the crankshaft with a 3 bolt puller.
How do you remove a power steering pulley on a 1997 Nissan Altima?
how to remove a power steering pulley on a 1997 Nissan altima
How do you remove the cowling over the windshield wiper linkage on a 2000 Nissan xterra?
Diagram replacement linkage for wipers 2000 Nissan Xterra.
Do you need to remove camshaft pulley to get to distributor cap screws on 94 caprice?
Remove crankshaft pulley& ballance
Where is the crankshaft sensor located on a Mazda B2500?
Hello! The crankshaft position sensor is located behind the crankshaft pulley,on the left side facing the front of the car.It is difficult to see and to remove it you need to remove the crankshaft pulley ( radiator,belts,.... )
