Want this question answered?
To remove the door panel, there are two screws you need to remove which are located under the door handle(the one you use to pull the door to close it) ,the you need to remove the mirror adjusting knob by pulling it out, then remove the window handle ( there is plastic ring around the handle which comes between the handle and the door, you need to pull it up using a screwdriver then simply pull the handle out), then just pull the door handle out with a screwdriver from the edges or preferably with your hands.
You begin by removing the door panel first. Removal of the door panel reveals the available screws that need to removed before the mirror gets off.
Interior light for astra mk3 not coming on when door opened or headlight switch pulled.
i have no idea but....
13.5 cm
what model is it? i.e mk2 2.0 172 or mk3 1.2 16v? mk3 1.2 16v
The Knob is threaded , Just unscrew it by hand
Thermostat is on the back passenger side of the engine. You will have to remove the right engine mount, accessory belt, and alternator in order to access the water neck that houses the thermostat. Get a mirror so that you can see where the water neck is located.
easy two plastic screws under seat
It depends on what you mean by Mk2. Original Mk1 caddy was a pick up based on Mk1 Golf sold until about 89 Then the Mk2 Caddy was a van based on Seat Inca (Polo and Ibiza) but is sometime referred to as the MK1 Van. This is where it gets confusing as at the same time as the van was on sale, they brought out another Caddy pick up based on the Skoda Felica pickup so it is either the Mk2 pickup or the Mk3 Caddy.. Now since 2004 there are new van varients out sometimes referred to as the MK2 van, Type 3, type 20 or Mk4 Caddy.... I have a 99 Mk2 Caddy (van) and it does not have central locking or remote central locking as standard but I fitted a kit from ebay to give it remote central locking
If it has power door locks it's in the power door lock asm. It is activated when the latch moves to the locked position. Just removed mine to replace the switch so still on the bench.
small screwdriver under indicator releases a clip then will come our very easily