Remove the plastic on the inside of the door oposite of the mirror there are 2 bolts that hold the mirror to the door and then you will need to disconnect the three wires that are attached to the motor it is easiest to remove the actual glass mirror from the housing in order to get to them but the glass pops out pretty easy so it is no big deal. it takes about 5 min to remove and reinstall. hope this helps and good luck.
move it
the mirror should just pop out, remove the two heating wires and install the new mirror
on my 1988 i had to first remove the door panel and then reach up there and hold the little bracket and then unscrew the mirror and dont forget to unplug it is electric and reverse it to re install it
Hey Brian==If it is electric, turn the button that operates the left mirror and it will control the right one. Some have just the right mirror electric. GoodluckJoe
how do you replace a drivers side mirror on a el ford falcon
If your car is on and your driver side mirror motor is working then it can be anything from a break in a wire to a stripped gear in the mechanism to the mirror motor going bad.
u dont u are suppose to leave it alone lol.
You can view the 2000 Mercury Cougar owners manual online at : www . motorcraft service . com ( no spaces ) Click on Owner Guides The Owner Guide has pictures and meanings ( starting page 21 for the overhead warning lights )
Pop the trim on the leading edge of the window. There will be I believe three nuts to take loose. If the mirror has electric adjustment, it will simply unplug.
take the door panel off and then you can get to the 3- 10 millimeter nuts that hold the mirror on, take the nuts off and if the mirror is electric you have to unplug the mirror from the harness and then just pull the mirror off, to install just reverse the process.
Remove the inside door panel of your 1993 Chevrolet Lumina. Remove the passenger mirror wiring harness. Remove the passenger mirror retaining bolts. Reverse the process to install the new passenger mirror.
To replace the passenger side view mirror you will have to remove the inner panel of the passenger side door to get to the three nuts that hold the mirror in place. To begin you will need to remove the inside handle of the passenger side door (there are two screws holding the handle in place) they are relatively easy to remove with a socket head screwdriver. You will need to pop off the handle insert to see the first screw. The other screw is under the electric window control pushbutton cover. Just pull that cover up to see the second screw. Also you will have to remove the connector from the electric window switch to remove the door panel. The electric window switch just unplugs from the backside of the switch. After you have that removed then pry the door paneling off the door which is held by snap in plugs around the perimeter. You will then be able to see the three nuts that hold the side mirror on to the door. Also you will see the electric connector for the mirror motor that you will need to unplug to remove the mirror.