To start pull down the glove box and you will find two Phillips screws you will need to undo these.
On the drivers side underneath the steering column there is a little pocket pull the pocket down and there are two Phillips screws you will need to unscrew these.
Underneath the pocket by the pedals there are four Phillips screws you will need to unscrew these and the plastic will release.
Remove the gear knob by unscrewing,then pull the plastic surround around the gear knob and handbrake.carefully remove the wires for the cigarette lighter then pull panel clear.
With a straight screwdriver you will need to remove the heater switch by the stereo carefully,then remove the wires for the heater switch.
You will find two Phillips screws behind the heater panel you will need to unscrew these and the fascia will release.
You will find two Phillips screws on both sides of the stereo.
You will need to unscrew these and the stereo will release.
Finally you will need to release the wires and the aerial connection to the back of the stereo,the stereo will release and you will have completed removing a stereo.
Congratulations on behalf of the ford centre for succesffully removing a stereo for a fiesta mark 6.
How to refit a mk6 fiesta stereo
firstly you will need to reconnect the stereo wires back into the stereo making sure that all is working before refitting stereo back into the dash.
Write the stereo code on top of the radio for next time and simply push back into the dash.screw the four Phillips screws back into position and check to see if secure.
You will need to get the heater panel back into place with the two phillip screws,connect wires for heater panel,push back into correct position.
Put the surround around the gear stick back into position and screw gear knob back on.
Apply screws back into the little pocket by the steering column and push pocket back into position.
Insert four screws down by the pedals which is holding the plastic surround in position.
Congratulations you have successfully refitted a fiesta stereo.
To remove the air filter on the Fiesta MK6, first remove the bolts on the top of the air filter box. Then, pull upward to remove the rubber gasket around the box. Remove the screws at the rear of the box. Remove the filter and replace it.?æ
the mk6 fiesta 1.25 has 75bhp.
Depends on the engine. A variety of different petrol engines and a diesel option were fitted to the Fiesta Mk6. All have different filters.
Mk6 1.4 Duratec SE 16v 02> gap should be 1.3mm.
Nope, pins are different.
in the door panel and in the the rear side panels. hope this helps
Yes they will all fiestas from mk4 to 7 as far as i know all have the same 5.5mm space of alloys
Take it to a specialist, I've looked on here and nobody knows!
5" X 7", & aparently 20 watts each
yes
Yes,the mk4 and 5 chassis' are identical and generally any fiesta front wheel drivetrain can be transplanted into any other fiesta engine bay up to mk6.
The MK6 Ford Fiestas take some fairly specialized wiper blades. Its best to look up the wipers by exact year rather than generation of vehicle. See sources and related links below to lookup the exact year of the Ford Fiesta.