Brake rotor removal varies on different vehicle. You must first remove the caliper. Some brake rotors simply come off after this. Some rotors are fastened to the hub by screws. Some rotors are bolted to the hub, and the wheel bearings must be removed.
In most Fords the rotor will come off when you unbolt the brake caliper.
replace front brake discs and pads.
Are you asking about brake discs?A re't they slip off rotors? remove the front tires then the calipers then slip off the rotors.
there are brake shoes in the discs too . just remove the discs and you will see them. they are applied by a cable.
By going to the nearest service!
Remove the front tires and wheels. Remove the brake assembly. Tap on each rotor disk to loosen them. Slide the rotor disk off. Reverse the process to install the new rotor disk.
= What tool to remove a front brake pads on a 2007? =
Jack up and block the car. Remove wheel, remove brake caliper. Rotor is now free.
you have to remove the caliper and the discs sieze on the hub plenty of wd40 and a big hammer make sure there are no grub screws holding the disc to the hub first
A car what has front disc and rear drum brakes have front brake pads and rear brake shoes.
Typically integral parking brakes are on rear disc braking systems. By activating the parking brake it adjusts the discs on the rear brakes. While the front discs are self adjusting, on the integral systems the rear discs are not self adjusting, thus the need for the integral parking brake system.
Check the front brake sensors. Replace them if they are worn out. Make sure you get the correct front brake sensors.