0
There is a special tool that most auto parts stores have for this.
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do i remove brown fuel line clip or connector from fuel pump or tank on a 03 ford expedition?
You need fuel line clips that release the spring inside the clips.
How do you replace the fuel filter in a 2001 Hyundai Elantra La Vita?
You have to take out the back seat (remove the two bolts behind the cushion and lift the seat out). The fuel pump is under a round cover,(the fuel filter is in the gas tank) you will need a flathead screwdriver to pry it open. There are three connections, an electrical connector, a fuel supply line and a fuel return line. Unplug the elecrical connector and start the engine,(to release the fuel pressure) & let it run until it stalls, you can then remove the fuel line and return line. All you have to do then is take out the 8 bolts that hold the pump in and remove the pump. the fuel filter is inside the pump. Sounds easy right?
How do you attach fuel line on Craftsman Weedwacker model 358.797150?
drain the fuel, remove the fuel filter from inside the tank, remove the old fuel line from the filter, remove the old fuel line from the carb, pull old fuel line out, install new fuel line through the tank, reconnect fuel filter to new fuel line, place filter and slack line into tank, connect new fuel line to carb, refill tank, check for leaks.
How do you remove the hydraulic line for the clutch in a 1995 Ford Explorer?
push in on line and push the plastic bushing that is on the connector up inside the connector itself to release it.
How do you replace fuel injectors on 2001 Hyundai elantra?
# Relieve the sytsem fuel pressure # Disconnect the negative battery cable # Disconnect the vacuum hose from the fuel pressure regulator # Disconnect the main injector harness electrical connector and the injector connectors.Detach the wiring harness retainers from the fuel rail and set the harness aside.Apply a numbered tag to each connector with the number of the cylinder # Remove the two bolts that attach the fuel pressure line flange to the fuel rail and disconnect the pressure line from the fuel rail # Loosen the hose clamp and disconnect the fuel return hose from the fuel return line # Clean and debris from around the injectors.Remove the fuel rail mounting bolts.Gently rock the fuel rail and injectors to loosen.Remove the fuel rail and fuel injectors as an assembly.Remove the fuel rail insulators.Inspect the insulators for cracks.If the insulators are cracked replace them # Remove the retaining clip and remove the injectors from the fuel rail assembly # Remove and discard all the old o-rings and seals and replace with new ones
How do you replace a fuel tank sending unit on a 1995 Ford escort wagon?
1. Disconnect the battery ground cable. 2. Relieve the fuel pressure. 3. Remove the rear seat cushion. 4. Disconnect the fuel pump electrical connector. 5. Remove the 4 fuel pump access cover screws and remove the fuel pump cover. 6. Remove the fuel line clips and disconnect the fuel lines. 7. Remove the fuel pump locking retaining ring and remove the fuel pump. 8. Take off the sending unit and replace it with a new one.
How do you change fuel filter 1999 Nissan maxima?
Relieve the fuel pressureRemove the rear seatRemove the fuel pump/fuel level sending unit access cover.Disconnect the electrical connector from the fuel pump/fuel level sending unit assembly and set the cover and wiring harness asideHold the sides of the fuel line quick disconnect connector,completely depress the connector tabs and pull out the tube inserted in the retainer.Disconnect both fuel linesRemove the fuel pump/fuel level sending unit six mounting screwsCarefully meneuver the fuel pump/fuel level sending unit assembly out fuel tankThe fuel level float and sending unit are delicate.Using a screwdriver,release the locking tabs on the chamber flange and remove it from the fuel pump/fuel level sending unit chamberCarefully pull the fuel tank temperature sending unit wiring harness part way out of the fuel pump/fuel level sending unit.Do not try to disconnect itUsing a screwdriver,release the snap fit portion and pull on the fuel level sending unit and remove itDisconnect the fuel pump electrical connector hold the sides of the fuel pump line quick disconnect connector,completely depress the connector tabs and pull out the tube inserted in the retainer.Disconnect both fuel pump fuel lines from the fuel level sending unit assemblyCarefully pull the fuel level sending unit assembly part way straight up out of the chamberUsing a screwdriver,release the two locking tabs and remove the fuel filter from the chamber.Remove the fuel pump bracket and pull out the filterPull down and remove the fuel pump from the fuel filter housing
Fuel line leak on Tahoe?
You can remove your Chevy Tahoe fuel line by turning the fuel line swivel nuts to the left. Removing and replacing the fuel line is the best way to repair a fuel line leak.
Replace fuel pump 1999 Nissan maxima?
* Relieve the fuel pressure * Remove the rear seat * Remove the fuel pump/fuel level sending unit access cover.Disconnect the electrical connector from the fuel pump/fuel level sending unit assembly and set the cover and wiring harness aside * Hold the sides of the fuel line quick disconnect connector,completely depress the connector tabs and pull out the tube inserted in the retainer.Disconnect both fuel lines * Remove the fuel pump/fuel level sending unit six mounting screws * Carefully meneuver the fuel level sending unit assembly out fuel tank as far as possible * slide the hose clamp down the hose and remove the hose from the fitting * Disconnect the fuel pump electrical connector from the cover * Set the fuel level sending unit and cover assembly aside * Reach inside the fuel tank,depress the lock on the fuel pump housing and withdraw the fuel pump and housing assembly from the fuel tank * Carefully pry the fuel strainer off the fuel pump.Remove the fuel hose from the fuel pump outlet fitting * Depress the locking tabs and separate the two halves of the fuel pump housing * Remove the fuel pump from the fuel pump housing
How do you get the fuel filter off 2002 GMC Yukon when the normal fuel line tools won't work?
I have the exact same problem. Bought two different fuel filter tools, one specifically designed for the GM 5.3L and I still cannot get the filter to disconnect from the fuel line. The little tool will slide into the line but it is not enough to disengage. Is there a specific tool that I need? I have a 2003 GMC Yulon with a 5.3L "Z" Flex-Fuel (can run on standard gas or E85) engine (this problem is particular to the Flex Fuel model, the non-Flex Fuel model uses a different fuel filter). I too had this problem where the clearance between where the fuel line attaches to the fuel filter is too close to the body of the fuel filter to insert the fuel line removal tool. There are 2 ways around this problem. The first method (which is how I used to do this) is to remove the fuel line at the "downstream" end (closer to the engine) so that you can remove the fuel filter with the attached fuel line to your workbench/vice. The fuel line tool you currently have will work at that end of the fuel line. Next, cut the fuel line stub (the metal protruding from the fuel filter which the fuel line attaches to) from the body of the fuel filter using a hack saw. Then you will be able to insert the fuel line tool you currently have and remove the stub. Be sure to flush the fuel line with brake cleaner and use compressed air to be sure that any debris created by using the hacksaw has been removed from the fuel line prior to reinstalling the fuel line back into the vehicle. The second method (which is how I now do this) is to go to the following Kent-Moore Tools link: https://gmspecialservicetools.spx.com/SearchTools.aspx and in the "search" box on the right side of the page, enter "J-46363" which is the part number for the proper fuel line removal tool (about $15.00 for the tool). I still remove the fuel filter with the attached line from the vehicle (because even with the tool it is still not easy to remove the fuel line from the fuel filter) and insert the tool into the body of the fuel line connector and I can then remove the fuel filter from the fuel line. You will sometimes have to turn the tool or move the fuel line toward the filter body and away from the filter body to get the internal clip in the fuel line to release from the fuel filter. This is why I still remove the fuel filter with the line attached from the vehicle because this is no fun to do laying on your back and getting gasoline in your face while trying to get the line free.
How do you change the fuel level sensor in a 2007 Trailblazer?
You have to remove the fuel tank. The sending unit is at the top of the fuel tank. Once you have done that remove the fuel lines and the electrical connector that hooks to the sending unit and remove it for the tank. All of this can be a pain if you have never done it before and if there is alot of fuel in it.
How do you replace the fuel filter located on a 2001 Nissan maxima gle?
Relieve the fuel pressureRemove the rear seatRemove the fuel pump/fuel level sending unit access cover.Disconnect the electrical connector from the fuel pump/fuel level sending unit assembly and set the cover and wiring harness asideHold the sides of the fuel line quick disconnect connector,completely depress the connector tabs and pull out the tube inserted in the retainer.Disconnect both fuel linesRemove the fuel pump/fuel level sending unit six mounting screwsCarefully meneuver the fuel pump/fuel level sending unit assembly out fuel tankThe fuel level float and sending unit are delicate.Using a screwdriver,release the locking tabs on the chamber flange and remove it from the fuel pump/fuel level sending unit chamberCarefully pull the fuel tank temperature sending unit wiring harness part way out of the fuel pump/fuel level sending unit.Do not try to disconnect itUsing a screwdriver,release the snap fit portion and pull on the fuel level sending unit and remove itDisconnect the fuel pump electrical connector hold the sides of the fuel pump line quick disconnect connector,completely depress the connector tabs and pull out the tube inserted in the retainer.Disconnect both fuel pump fuel lines from the fuel level sending unit assemblyCarefully pull the fuel level sending unit assembly part way straight up out of the chamberUsing a screwdriver,release the two locking tabs and remove the fuel filter from the chamber.Remove the fuel pump bracket and pull out the filterPull down and remove the fuel pump from the fuel filter housing
