1) Unplug the wire to the headlight.
2) Remove black rubber piece surrounding the headlight bulb. Can be hard to remove, just pull gently.
3) ... This is what threw me off... The clip that holds the bulb is supposed to be pulled to the side (to unlatch it), then pushed towards the engine. (I thought it needed to be pushed down, but it doesn't.
Hope that helps!
you can go to a auto shop and buy a rx300 bulb and after you can get someone to remove the headlight and you can remove the bulb and put the new one.
The headlight assembly does not need to be removed in order to change a light bulb. Take hold of the light bulb connector. Push the connector in and turn to the left at the same time. The light bulb will come out.
1997 Lexus LS400 headlight bulb lamp replacement: Purchase the correct replacement headlight bulb(s) first, before disassembling the vehicle. See sources and related links below for replacement bulb information. Then consult your owner's manual for the headlight bulb lamp replacement procedure. As simple as it sounds, the owner's manual is the best place to start for bulb replacement instructions and illustrations. You may want to consider replacing both left and right at the same time in order to keep brightness and color equal (optional).
To replace the parking light bulbs, remove the screw on top of the headlight and pop out the clearance light. The parking light bulb will be accessible after this removal.
To replace the headlight bulb: 1. Remove the headlight door. 2. Remove the four screws that hold the headlight bulb in place. 3. Pull the headlight bulb out and unplug the wire harness. Reverse the process to install the new headlight bulb.
A 1997 Mercury Sable takes the ( # 9007 headlight bulb )
All you will need to change the bulb is a screwdriver and a new bulb. Remove the headlight cover using the screwdriver and remove the burnt out bulb. Once out, you can insert a new bulb into the slot and replace the headlight cover.
No need to remove the headlight assembly. twist & remove the light bulb from the rear of the headlight assembly. Do not touch the new bulb glass with your hands. Oils from your hands will cause bulb failure.
Open Hood. Remove the cover from the headlight by prying up the keeper. Remove the metric 13 nuts holding the headlight in. Take out headlight and replace the bulb. Reinstall the headlight and reinstall headlight and cover.
Open the bonnet. Remove the grill. Remove the screws holding the headlight in. Carefully pull the headlight out. Remove the cap on the rear of the headlight.
Head to the nearest Lexus dealer that is how they design the car and yes it a shame.
The headlight is an assembly. To replace the headlight, you remove the bulb from the back side. It is a halogen bulb, so do not touch with bare hards before installing.