Want this question answered?
remove the trim from the interior of the lift gate. There is access to the connecting rods that will release the catch from the Nader bolts.
(1) Open the liftgate. (2) Remove the trim cover and latch mounting screws. (3) disconnect the actuating rod - detach electrical connectors (if any) - then remove latch from liftgate. Installation is the reverse of removal.
You will need to open the liftgate and remove the screws that hold in the tail light housing. Once removed, you can twist the bulb socket slightly to remove it from the housing and replace the bulb.
Remove the liftgate inner trim panel.Remove the liftgate inner trim panel.
Need to know how to remove the interior door panel so I can replace motor for electric window
Underneath the chrome trim above the license plate. Remove the 4 or 5 screws that hold the trim in place and the chime will be the round speaker attached next to the license plate light.
First remove your door panel and interior lock module modular with T30 screwdriver. Then proceed to remove the window mechanism and your interior panel. A T20 screwdriver to remove the interior panel and lock module from the inside of door. Disconnect your control module and replace with a new.
Open liftgate, for outboard taillights remove two round plastic covers with a small screwdriver, remove screws, entire taillight assembly will come out, remove bulb and replace with new one, put it back together. On liftgate taillights, remove the two screws with a wrench or socket, remove taillight assembly, replace bulb and re assemble. If you want to do it the easy way, get this video. I bought it...worth every penny. at the end of the trailer there is an email address, ask for the video. Here's a link http://www.youtube.com/watch?v=Fmo-WcinNhU
With a wrench!
how do you remove dome light lens on 2008 trailblazer
To replace interior Ford fusion door handle you must remove the door panel, take off the old handle and replace with the new one, and then replace the panel back on the door frame.
Remove the center console/cupholder. Remove the interior doghouse. Remove distributor cap.