First remove your door panel and interior lock module modular with T30 screwdriver. Then proceed to remove the window mechanism and your interior panel. A T20 screwdriver to remove the interior panel and lock module from the inside of door. Disconnect your control module and replace with a new.
remove the two nuts holding the master cylinder on the power brake booster
how to remove the door panel of a 1995 s10
Begin by removing the hose from your power steering cylinder. Remove the power steering cylinder retaining bolts. The power steering cylinder will come off.
pull out the passenger side inner fenderwell. once out you can get to all the things needed to remove/replace.
Disconnect electrical connection Remove and cover brake lines Remove mounting bolts Pull Master cylinder off power booster Install in reverse order, but remember to BENCH BLEED master cylinder prior to installing
take the door panel off and their are 3 nuts you must remove and unplug the power supply going to the mirror
front cylinder on passenger side . . . front to back passenger side 1,3,5,7 front to back driver side 2,4,6,8
Very simple just remove the plastic cover on the inside of the mirro then remove the 3 ten mm nuts and unplug the connector pull out the mirror and your done
First remove the leather triangle cover on the inside of the car, where the mirror mounts. there are several screws there, and a electrical connection if you have power mirrors.
Unbolt the master cylinder and remove the large vacuum hose. Remove the 4 nuts that attach it to the firewall and it slides right off. It's a pretty simple job.
you will have to remove the other belts first, then from the underside loosen the power steering pump.it is pretty neasy but you definitely need to jack up passenger side with support stand.
The side mirror on my 2004 alero was knocked off. Its the passenger side mirror. How do you remove the mirror because the power cord attached to the mirror is still attached.