Scrape it as clean as possible and spray it with WD40 and let it soak. Several applications will be needed depending on how long the adhesive has been there. Additionally, acetone can be used to remove residue after it's scraped.
This answer comes from the manufacturer of Liquid Nail products:
If you cannot cut the adhesive out of the carpet, then I would suggest using gentle heat from a hair dryer to soften the dried adhesive. Once it's softened, use a toothbrush to brush the softened adhesive from the outside of the "glob" into the center. Then pick off as much as you can. Continue the gentle heat, scraping into the center, picking off what you can. Once you have the "globs" off, you can try mineral spirits or paint thinner on a clean, white rag (don't pour it directly onto the carpet) and pinch the adhesive residue with the rag and lift up so you don't spread it out even more.
BEFORE YOU TRY MINERAL SPIRITS ON YOUR CARPET, PLEASE TEST ON AN INCONSPICUOUS AREA (like in a closet) to be sure the mineral spirits/paint thinner will not discolor the carpet.
Per the FAQ list at LiquidNails.com:
In general, LIQUID NAILS adhesives & caulks can be scraped off when they are softened either by: # Heating above 140°F with an electric heat gun or blow dryer. # Coating the adhesive with petroleum jelly or mineral spirits for several hours to several days. (Note that mineral spirits are not recommended for tub surrounds, vinyl, plastic, painted or varnished.)
if smeared tough if not let dry pull
Brake Cleaner works great, spray it on use a stiff tooth brush agitate back and forth as if brushing your teeth. Then wash.
Finger Nail Polish Remover
If the Liquid Nail is a small area, yes, but not if the entire tile surface is over it.
Sandpaper
It should come of with Nail Polish Remover.
Use acetone.
use aliqid nail remover
take the tiles out and remoce the nail or you could use a chisel
There should be no Liquid Nail residue on drywall . If there is a considerable quantity of it, it's easier to cut the board out and replace it .
It's to remove yellow surface discoloration or stains (e.g.,tobacco stains)
To remove varnish from any surface, use Acetone. Acetone is also in nail varnish remover.
No, hand sanitizer will not remove nail polish. Hand sanitizer is made up of mostly alcohol, an ingredient that kills germs. Nail polish needs something strong such as acetone or an acetone alternative, like ethyl acetate to remove it. Alcohol, when used on a clean nail prior to polishing, actually makes the nail polish adhere better because it cleans the surface of the nail!
whatever you use be careful not to remover the lacquer the best thing to use is super strength nail polish remover that contains acetone I glued a piece of carpet to my bathroom floor without removing the vinyl first when I ripped up the carpet it left the glue on the floor and I went to the chemist to buy nail polish remover that contained acetone and that work great just the job it also removes stupid glue-(Super Glue)