using a 13 mm socket wrench i believe, its not that hard i replaced the window and electirv crfank motor by myself and i never worked on a car in my life. so im sure that will be easier...also why remoive the crank it wont crank? handle fell off? also besure to remove the cosmetics of the car they all unscrew and pop off.... pay attention to put it back together unclip any electrical component first thought u prolly have none....
Most of them have a center screw with a hex head for an Allen wrench. Don't ask me what size, just try your mm sizes until one fits snugly!
Buy a Haynes manual and read it.
To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.
First... get a repair manual. Follow the instructions...
In a repair manual, available at NAPA or AutoZone.
Turn the camera over. There's a little button on the bottom somewhere. It releases the gears in the takeup spool; push it and you can rewind the film with the film crank. Once the film's completely rewound into the cassette, pull up the rewind crank and the back opens. This is how film is removed from any manual-focus 35mm camera.
When replacing the regulator on a 2006 Ford Fusion, you need to follow the instruction on the manual so as to be able to replace the actuator on a 2006 Ford Focus with power window.
Go to Napa and buy a Repair Manual.
You have to remove the entire door panel. The speaker cover only looks like it will come off. The Focus door panel is one of the simplest ones to remove as it does not use those @#$%! clips, only screws. You only need a Torx driver (20 I think) and a socket for the door pull. A couple of small blade screwdrivers are needed for pruing off the covers and getting to the window crank (if not power) is a bit annoying the first time. I would strongly encourage getting the repair manual from the auto parts store. They cover this procedure quite well ......
To replace the blower motor 2005 Ford Focus, you have to see the attached instructions on the manual. A screwdriver will help you remove the screw.
it has focus..
Remove bolts L1 through to L5 and shake vigorously till it comes loose