It can't be done without cutting the pipe
No, there is no suitable adhesive. These must both have threaded endings and be mechanically attached or use something like a 'Sharkbite'
Abs to PVC glue sold at home depot Color it aqua blue/green plumbers key term. GUMBY GLUE Depends upon what you mean by "black pipe". If you mean ABS drain pipe, there is glue for that. If you mean steel "black pipe", i.e., non-galvanized, then you would need a threaded connection adapted to the PVC (either a female PVC connector on a male black pipe or a male PVC connector into a female black pipe fitting). The secondary question would be, "Why would anyone want do to that?"
This is quite confusing. -If you mean "plumbers glue that has been glued to the metal pipe" as opposed to "a shower that has been glued to a metal pipe" , then it's a little easier. -Any plumbers glue, be it ABS, PVC or CPVC glue, or Transition cement can be peeled off metal pipe.In future PLEASE say what exactly you mean by "metal pipe" - copper, - galvanised, or which other metal, and please -Name your glue - Most plumbers commonly use at least 4 different glues.
Yes
With a PVC locator
NO. Although you may have plumbers PVC glue, it doesn't work well with flexible PVC like an inflatable. -Better products are Aqua Seal (available in Walmart Sports Dept) or 3M Marine Adhesive.
It's possible - but tricky. You would need an adhesive capable of 'sticking' the two types of pipe together.
A copper pipe is the preferred choice of many plumbers for water lines. A PVC pipe is very versatile also though, and is another favorite amongst plumbers when dealing with water lines.
No, there is no suitable adhesive. These must both have threaded endings and be mechanically attached or use something like a 'Sharkbite'
Abs to PVC glue sold at home depot Color it aqua blue/green plumbers key term. GUMBY GLUE Depends upon what you mean by "black pipe". If you mean ABS drain pipe, there is glue for that. If you mean steel "black pipe", i.e., non-galvanized, then you would need a threaded connection adapted to the PVC (either a female PVC connector on a male black pipe or a male PVC connector into a female black pipe fitting). The secondary question would be, "Why would anyone want do to that?"
There is a tool called easy out.
You can dig to the pipe, clean it and roughen it, then use purple primer and Weld On 711 to repair it. . I would wait 12 hours for this to cure then do another coat of 711. - I have done this on PVC pipe that was carrying mains water at 85 psi.
first of all its a P.C.V. valve not a PVC. PVC is pipe that plumbers use to remove waste from most modern homes. Second, Its usually located right on top of the engine valve cover housing. They usually seat in a rubber grommet and should pop right out if you pull it firmly straight out of their socket. :o)
This is quite confusing. -If you mean "plumbers glue that has been glued to the metal pipe" as opposed to "a shower that has been glued to a metal pipe" , then it's a little easier. -Any plumbers glue, be it ABS, PVC or CPVC glue, or Transition cement can be peeled off metal pipe.In future PLEASE say what exactly you mean by "metal pipe" - copper, - galvanised, or which other metal, and please -Name your glue - Most plumbers commonly use at least 4 different glues.
You use PVC adhesive with a primer to join PVC pipes. Prime both pieces first, then after primer is dry paint a coating of glue on both pieces and force together, hold for at least 3-4 minutes for best joint. This will not cure for at least 4 hours so don't put any liquid in pipe for that period.
I was in the PVC pipe manufacturing business for over 30 years and have never heard of a "1K PVC" pipe. If "1K" means a 1,000 psi pipe, this does not exist as a commercial product. Sorry.
An instrument made of PVC pipe.