Power Steering
Chevy Silverado

How do you remove power steering pump on a 95 Chevy silverado?


Top Answer
User Avatar
Wiki User
2015-07-15 18:54:50
2015-07-15 18:54:50

alright, first disconnect the negative battery cable, we don't want uncle Bob trying to start your truck with you under the hood and you don't want to get hit by anything that has a charge runnung through it. Second, remove the serpentine belt, This is done by putting a 1/2 inch wrench of the back side of the tension pulley and removing the tension. third, you're going to have to borrow, buy, or steal a pulley puller to remove the pulley on the poower steering pump. Then there are the hydraulic lines... the low pressure side can be removed with flat head screwdriver. the the high pressure side is a pain to remove so have fun. IF you can afford it, it's good practice to replace the lines anyway. You may end up bending then anyway. Next remove the bolts that hold the pump in the bracket. There are three and they are 1/2", Reverse the process if you want to put one back in.


Related Questions

User Avatar

How do you remove power steering pulley on a 1990 ck truck

User Avatar

Remove the belt from your 1969 Chevy power steering pump. Remove the power steering pump hoses. Remove the power steering pump retaining bolts. Reverse the process to install your new power steering pump.

User Avatar

This requires a power steering pulley puller. This puller is designed to remove and install a power steering pulley without damage to the pulley and or pump. Attempting to do this without the puller will result in damaging the pulley or the pump or both.

User Avatar

You NEED to replace the rack and pinion steering unit.

User Avatar

It does not matter on that year, just make sure that it is POWER STEERING FLUID.

Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.