Good luck Ive owned several rodeos I have a 2003 model now that needs the back shoes replaced. Ive never been successful removing the drums from one of these things. Ive done hundreds of brake jobs on all makes and models, some tougher than others, but Ive always had success Their is a hole on the upper part of the back of the hub you can use a screwdriver and adjust the tension off the brakes much like all other vehicle models, of course make sure your emergency brake is disengaged. Give it a slight tap with a hammer to break things loose, and it should slide right off. If that doesn't work move to a drum puller. Be advised though I worked for my local dealer for several years and witnessed Isuzu trained techs. with a shop full of specialty tools at their disposal have fits with these things. Their again Ive never had any success removing the drums from a rodeo . I finally cut them off with a torch and replaced them. GOOD LUCK/BE CAREFUL
My 98 rodeo has disk brakes in the rear not drums,are there drums on some models.
adjusting Isuzu rodeo brakes
hoew do you remove a c v axle from a 97 isuzu rodeo front right
How do I remove the front shock bottle pin of my Isuzu rodeo 2000
how do you remove transmission in 1999 rodeo
I don't think that will work unless you change over to rear disc brakes, the hub should not match.
How to remove the starter from a 1997 Isuzu Rodeo 4X4 automatic
remove the six lug nuts
The oil in a 1993 Isuzu Rodeo is put into the reservoir that is located on top of the valve cover. There is a cap that has to be rotated to remove it.
Take it to a mechanic!
no
Remove beltUnbolt tensioner and remove