I tried for an hour to do this on my own before I gave up. So don't feel bad if you can't do this - I think the design leaves a lot to be desired. I ended up going to the dealer - and they had trouble too until the manager who had a Sienna came out and showed me.
This is what we did to make it as easy as possible
1. Remove the Headrest of the seat you are removing.
(Click release at base of headrest and pull up)
2. Move seat You are taking out all the way back
3. Move front seat all the way up
4. Use lever on side of seat to "Flip" seat up
5. Pull release strap (rear of seat you are taking out)
6. Lift seat out
** Note when putting the seat back in - put the small strip of rug
over the back tracks in the floor. The reason fo this is when you are
positioning the seat - it sometimes slips into the back tracks before
you get the front ones lined up and clicked in the front tracks. Man - this
is a PAIN when it happens. It gets stuck, cockeyed, and all messed up.
You have to go inside the seat to click two red buttons to release, and
it is a bear to do so..
Also, be sure to put the correct seat on the correct side. Yes, they do have sides as I found out the hard way. (Maybe on the leather seats only, but check all seats for the lever that folds them down, it should be on the side toward the door). Talk about PAIN. It's a real pain to take out a seat that is stuck because it's on the wrong side.
FOLLOW UP QUESTION:
Can you give details on the 2 red buttons used to release the back seats. I accidentally put the back side first and do not know how to release the seats.I would really appreciate a reply. Thank you.
As long as you have a 2005 and newer Toyota Sienna, you can get replacemend rear seat entertainment headphones from the website in the related link.
The type of the rear seat of the Toyota Corolla will determine how you will remove it. For instance, for a folding seat, all that you will need to do is to lower the seat to gain access.
How do you remove seats in a 2007 Camry SE
Pop up the corner of the rear seat and that will give you access to one bolt on the bottom of the side panel. Once removed you can push up on the side panel for easy removal.
The rear seat is not designed to be removed. You can remove the center seat and slide the rear seat forward.
Yes it does
In Sienna 2006, spare tire is below the 2nd right seat.
The Toyota Sienna can seat up to 8 people. It also comes with seating for 7 people depending on which option is ordered.
Go to the nearest mechanic he'll help you out :D LOL
To remove the rear cup holder on a 1998 Toyota Corolla LE, first remove the seat. Then remove the four bolts holding the cup holder housing.
Remove the bolts fastening the rear seat cushion (Figure 7.52).Remove the rear seat cushion assembly.Remove the screws and remove the side rear seat back (Figure 7.53).Remove the lower bolts fastening the rear seat back.Tightening torque - 17-26 NmFlip forward the rear seat back, remove the bolts and remove the back seat.Tightening torque - 17-26 Nm
The rear seat isn't designed to be removed. If you have a center bench seat you can remove that by unclipping it, then slide the rear seat forward.