Want this question answered?
To remove the 2002 Hyundai accent rear seats find the tabs that cover the bolts and unbolt them. After the bolts are out lift the seat to remove it from the car.
Remove the 2 screws and take off the plastic piece.
remove three bolts on the top of the rocker cover dust cover then remove plugs in the usual manner
Behind the fuse cover located on the left of steering column. You must remove the cover to see it.
It is located under the rear seat. To access you must first remove the cover.
Gently pry up on the speaker cover with a small screwdriver or knife. There are screws under the cover to remove the speaker, unplug harness and its free.
Under the dust cover. Remove the 4 bolts that are covering it.
Remove the cover on the steering column. Then remove the screw holding the plastic cover around the switch. Then turn the key while pushing in on the tab below the switch, it will click and then you can pull it out.
Remove the factory speaker cover on the inside of the door and remove the 3 screws from the mirror. The speaker cover is held in with 2 clips, one at the top and one at the bottom. They are friction fit clips.
The torque specs on the valve cover bolts on a 1999 Hyundai accent are 71 to 89 INCH pounds or 8-10 N.m.
72in-lbs
72in-lbs